When greasing the steering neck on a Harley-Davidson Fat Boy, typically just a few pumps of grease from a grease gun are sufficient. It's important not to overfill, as excessive grease can lead to pressure buildup and potential damage. Ensure that the fitting is clean before applying grease, and check for any leaks after greasing. Always refer to the owner's manual for specific recommendations on maintenance.
GREASE 1 had a budget of 6 million dollarsit made $394,589,888
A standard tube of grease typically contains about 14 to 16 ounces (approximately 400 to 450 grams) of grease. However, the exact amount can vary depending on the manufacturer and the specific product. It's important to check the packaging for the precise volume or weight of grease in the tube you are using.
West Side Story grossed $43,700,000 worldwide.
It depends on the condition of the trading card.
It seems your question might be incomplete. If you're asking about the amount of grease in a specific context, such as cooking, machinery, or a particular recipe, please clarify so I can provide a more accurate answer. Generally, the amount of grease needed varies widely depending on the application or recipe in question.
A tractor has numerous fittings which require grease to maintain the proper lubrication to moving joints. No lube and the fitting will either lock up or waer out much faster.
If it is original then no. Usually with that much time on the u-joints it's time to change them. Front and back. The jobber ones have the grease zert.
This depends somewhat upon what model year it is, and upon what parts may, or may not, have been replaced. Many vehicles now come equipped with sealed parts that do not require any more grease than they were constructed with, and therefore, do not have grease fittings at all.That said, here are the parts to look at, and if they have fittings, to grease (Carefully, don't overgrease, too much grease can do as much harm as good sometimes. Try not to pump so much grease into a part that it squirts out of the rubber boots, just enough to make the boots plump).From underneath:Ball joints (1 upper and 1 lower per side, on the front end).Steering linkage (usually 1 tie rod end per side plus whatever joints you find between them).Drive shaft universal joints (one at each end of each shaft) (don't forget the front drive shaft if it's a 4X4).From above:Some telescoping steering shafts may have a grease fitting somewhere along the shaft (under hood).Some steering shafts may use universal joints at each end that may have grease fittings (under hood).Some door hinges may have grease fittings for lubrication.
transmission fluid can make rubber expand check for leaks. as will and petroleum based oil if you used a grease gun on the boots make sure you used lithium grease. coulld be you filled them with too much grease or if you have power steering you might have fluid leaking into boots. if it has power steering fluid in the boot the grease will be really runny and you need a new rack and pinion.
your a fatboy
3.5 Quarts!
3.5 quarts.
3.5 quarts.
3.5 qts
$25,000
The average Harley Davidson Fatboy weighs 694 lbs. The Fatboy is a popular model of motorcycle that has been featured in movies and TV shows. It was originally called The Ghost because it only came in grey when it first came out.
02 fatty standard has 63 hp (47kw)