in series
A: It must be be understood that current needs voltage other wise it is zero. An ammeter for DC is always a voltmeter that reads small IR drop to convert that reading into current present. Like an ohmmeter needs volts to read ohm. Both reading are volts it just convert those reading into whatever scale is switch to.
No. The ammeter must be designed to measure DC. Some clamp-on ammeters are designed to measure both AC and DC.
metaphor
The cathode must be made more positive with respect to the anode.
Both resistors will have the voltage of the battery.
Two.
The positive terminal of the battery would be connected to the positive terminal of the ammeter. The load would then be connected between the two negative terminals, positive side of the load being connected to the negative side of the ammeter.
When measuring a load current, an ammeter is connected in series with the load. The exception is for a clamp on style AC ammeter, which is clamped around one of the conductors, making its measurements as a transformer.
measures current in a circuit, must be series connected
Series connect it within the line of the circuit for which you are interested in measuring the current flow.More detailSince we measure the flow of current IN the circuit, the ammeter must be connected in series with the part of the circuit for which you are interested in measuring the current flow.One of the ammeter's terminals must be connected to a point of the incoming current flow and its second terminal must be connected to the point of on-going current flow. To do this, cut the relevant circuit wire and connect one terminal of the ammeter to each end of the cut.
To a very small resistance so a mv can be measured as a function of amperes.
A CT's secondary winding must never be open circuited as it may provide a shock hazard to the user. The terminals to which an ammeter is connected to a CT is normally provided with a set of links that must be closed, short-circuiting the CT, beforethe ammeter can be removed. The ammeter must the be reinstalled before the shorting links are reopened.
Ammeter should be inserted in the place where we need to find the current. Care must be taken while inserting ammeter such that it is in series always. For example if we need to measure the current through any device, we have to connect the ammeter in series with tht device.
Connect ammeter in series and voltmeter in parallel to the circuit
An ammeter must be connected in parallel to the circuit. If you do not understand the difference between parallel and series connection then you should leave it to a competent mechanic/electrician.
An ammeter must be connected in series. The polarity of the meter leads must be correct. meaning you expect positive current then connect the meter accordigly. the meter impedance must be very relativaly low otherwise that will ad a error. An ammeter is not connected in parallel because it is measures the electron flow through a path unlike the voltmeter which measures the difference between two points. Therefore it must be connected in SERIES. If it is connected in parallel it acts like a sorted wire linking the active and neutral conductors and therefore creates what is known as a short circuit.
You can measure the current and power of a 'power supply', using an ammeter and a wattmeter. With the power supply connected to its load, the ammeter must be connected in series with the power supply's input. The wattmeter's current coil must also be connected in series with the power supply's input, and its voltage coil must be connected in parallel with the supply, taking the instrument's polarity markings into account.