answersLogoWhite

0

If the fusebox melted there is probably a reason and it would be best to have it repaired proffessionally but assuming there are no short circuits you can run a single wire from the battery positive to the coil positive to get ignition power and then using a screwdriver bridge the main battery cable and small start terminal on the starter solenoid to turn the engine over.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

How do you bypass electric window switch on Toyota pickup?

how do you bypass electric window switch on 88 toyota pickup


Is there an easy way to bypass the air conditioner on a 1998 dodge 1500 pickup?

Check with your local part store for a bypass pulley or belt.


What is the hose on top of the water pump to on a 2000 dodge ram 1500 pickup?

Bypass hose.


How do you bypass the heater core on a 1994 S-10 pickup?

join the inlet and outlet hoses together.


Why won't a 1985 Toyota pickup stay running?

because your an idiot


What are DLR lights on a S10 pickup?

Day Light Running Lights.


How do you shutoff the Daytime running lights on a 1996 S10 Pickup?

Shift into neutral or park.


Were do you get a key code for 1999 f150 pickup?

if i have replace my steeringcolumn with one out of another ford truck and do not have a key for eithe how do i bypass antitheft and start vehicle


My 1984 Nissan pickup will not charge the battery. I have replaced the alternator and put in a new battery.?

Check your ignition fuse,its in the fuse box,also,your fusible link could be burnt or melted,its connected to your positive battery cable,if burnt or melted,then its your problem.


Location of daytime running lamp relay on a 1997 Chevy pickup?

Where's DRL fuse


How do you bypass a heater core in a 2001 Dodge pickup?

To bypass the heater core you need to remove the two water hoses going through the firewall from the engine compartment to the heater core and connect them together so that the water loops around back to the engine.


95 S10 pickup rough running and misfiring?

Check spark plugs and wires Do a compression test