Want this question answered?
Low pressure inside a cathode ray tube? How about nopressure inside the tube! In a cathode ray tube, the "cathode ray" is an electron beam that is used to paint a "picture" on the phosphor coating on the inside of the tube. (We look at the "picture" from the other side of the glass on which the coating is laid down - the outside.) An electron is a lightweight little dude. It weighs about 1/1836th as much as a single proton, so anything, any gas atoms that are in the flight path of an electron will cause it to scatter. That means we need to pump all the air out of the inside of the tube. After we remove all we can, we fire a "getter" (a chemical coated onto a small area inside the tube) which will bind any remaining gas molecules left inside the tube to complete the evacuation process. No more pesky atoms to get in the path of the electron beam and scatter it all over the place.
Yes and no . You tube allows free postings of videos of just about any thing you can do . Yo tube will charge you for some of their content. Both sites carry similar postings.
Well if he doesnt answer go on you tube or facebook or anything and ask if they have any number because some called cameron boyce on you tube so.go there is your only opportunity!
Unless something happens within Sonic X to prove anything, then there is no answer, except for your own opinion.
Rolling up might mean to arrive. The image is of an automobile rolling up to the door. It also might mean rolling a cigarette (or anything that you smoke rolled up in a paper). A third meaning would be literally rolling something into a ball or tube, as in rolling up a newspaper into a tube.
can you see any of the stick? or is it down inside the tube? dave tradertaippan@yahoo.com Drain oil, remove lower sump pan,drift out broken dipstick tube & replace with new tube.
It is really not that hard, get a 5 inch long corse screw put a thick washer on it, then screw it inside the the broken shaft ..then yank out with a claw hammer
There's either a steel or flexible shaft inside the tube between the engine and the head. That shaft is broken. Or if it's solid, it rusted inside the head
tube-light is coated with phosphorous from inside
If you get any dangerous chemicals on your body you go in a tube where a liquid falls on you and cleans of the chemicals. Don't worry you get to keep your clothes on inside. :D
Cathode Ray Tubes are potentially dangerous because they are vacuum sealed and can implode. This can cause the shattered glass to fly outward and also exposes the toxic coating inside of the tube.
- the test tube may break- the liquid can be spread outside
Because if the experiment being conducted in the test tube is explosive or very reactive then it can spit out stuff and this can be dangerous to your eyes or skin. so by pointing the test tube away then you won't harm anyone if anything spits out
Low pressure inside a cathode ray tube? How about nopressure inside the tube! In a cathode ray tube, the "cathode ray" is an electron beam that is used to paint a "picture" on the phosphor coating on the inside of the tube. (We look at the "picture" from the other side of the glass on which the coating is laid down - the outside.) An electron is a lightweight little dude. It weighs about 1/1836th as much as a single proton, so anything, any gas atoms that are in the flight path of an electron will cause it to scatter. That means we need to pump all the air out of the inside of the tube. After we remove all we can, we fire a "getter" (a chemical coated onto a small area inside the tube) which will bind any remaining gas molecules left inside the tube to complete the evacuation process. No more pesky atoms to get in the path of the electron beam and scatter it all over the place.
You tube is a rubbish dangerous website. i have complaines to you tube and you tube will be banned on the 24th November 2010 at 3.00 am thanks to me. ha ha!
Yes it does.
That depends on what's broken. If it's really broken, and you have no idea how to fix it, I'd STRONGLY recommend taking it to a reputable instrument repair shop. They have the tools and expertise to fix it. Anything you try to do to fix it might just make it worse.