The optical output of the PS3 can be connected to older surround sound receivers. Newer receivers can be connected with the HDMI cable.
Yes. Simply run a coxial aidio cable or a Toslink cable from your sony playstation to your amplifier and you will have linked your sony playstation with your home theatre.
The tick tock sound of a clock that the crocodile ate.
no
its not possible to use a broadband stick on a ps3 yet.
If you're using the RF cables, tune the TV to the correct channel and you should have sound. If you're using the RCA jacks, don't forget to add the audio cables for sound.
Yes, you can hook up a surround sound system to a Sanyo DP50740 television. The TV has audio output options such as optical and RCA (red and white audio outputs), which you can use to connect to an external surround sound receiver or sound system. Ensure that your surround sound system has compatible inputs for these outputs. Once connected, you may need to adjust the audio settings on the TV to output sound through the external system.
You can play dolby surround CDs if you have a surround-sound capable receiver. It should take no work on your end.
To hook up surround sound to your home entertainment system, you will need a receiver that supports surround sound, speakers, and speaker wires. Connect the speakers to the receiver using the appropriate wires, and then connect the receiver to your TV or media player using HDMI or optical cables. Adjust the settings on your receiver to enable surround sound, and enjoy immersive audio experience.
I tried to do this and there is no way you can have surround sound on that tv.
To hook up a surround sound system in your home, first, identify the audio outputs on your TV or media player. Then, connect these outputs to the corresponding inputs on the surround sound receiver using the appropriate cables. Next, connect the speakers to the receiver, making sure to match the correct polarity. Finally, power on the system and adjust the settings to optimize the sound for your room.
An HDMI cable connects from the Bell cable box to the surround receiver and then to the TV.
To hook up surround sound to your entertainment system, connect the audio output of your devices (such as a Blu-ray player or gaming console) to the audio input of your surround sound receiver using HDMI or optical cables. Then, connect the speakers to the receiver, making sure to follow the correct placement for optimal sound quality. Adjust the settings on your receiver to configure the surround sound setup, and enjoy immersive audio while watching movies or playing games.
It is very easy to get a surround sound hook up on the Viewsonic Widescreen TV hook up
You can connect a sound system through your TV or the Sonystyle.com site has a new PS3 sound system for under $200 that was designed for the PS3
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
Connect the digital audio output from the TV to the digital input of the surround sound receiver.
You will need the appropriate sound card and software.