Want this question answered?
A composite material is one material reenforced with another, such as resins reenforced with glass fibers, carbon fibre, or kevlar. The same principle applies to steel in concrete, woven fabrics encased in vinyl (such as in tarpaulins) or the reenforcing of rubber with synthetic fibres or steel wire, as in conveyer belts, fan belts, tyres, etc.
I was trying to find the same thing myself.According to SearchLit, Sense and Sensibility by Jane Austen is at a reading level of 12.7 (which comes out to be a grade level of 12th and up). Scholastic, however, considers it to be a grade level equivalent of 10th grade.
yes
Same as any other kind of resistor, they're used to control voltages and currents in electric circuits.
238U and 14C are radioactive isotopes of natural chemical elements.
No, B7 is high carbon steel alloy. G8 & G5 products are both medium carbon steel, but G8 has been hardened. Grade 8 steel and B7 are both harder than average low carbon steel. However they will both exhibit different characteristics from each other. The biggest difference will be that Grade 8 is much more brittle.
both of these are same In some places they are used interchangeabl low carbon steel has 0.05-0.15% carbon mild carbon steel has0.16-0.29% carbon http://www.metalsupplies.com/
Not much, avaliability is the same also. Our default has changed to killed carbon steel.
No. Calphalon pans are made of aluminum, not carbon steel.
Iron has a density of approximately 7.86g/cm3. Nails are not usually made from pure iron, but from soft steel, a mixture of iron and carbon. The density, however, is pretty much the same depending on the grade of steel used.
It's the same as normal steel, (Iron and Carbon) it's just got much less carbon in it.
yes its the same, only the standards are different.
According to my calculations, Carbon Steel was used thousands of years ago, because, if carbon steel swords were invented thousands of years ago then- heres a question: if carbon steel swords was invented back then, then what made carbon steel swords? the same thing we use to make carbon steel, which is mainly carbon and iron. The carbon, when mixed with molten iron, in fixed proportions, steel of varying strengths are formed. Steel is strong since the carbon atoms enter the metallic lattice of iron the difference in size of the carbon and iron atoms restrict movement of the layers (atoms) hence when a force is applied, the steel resists. by 11SHIFT
Stainless Steel is classified with a 300 code designation. Poorest grade is 302. Highest grade 347. Each grade contains a certain amount of Chromium and Nickel plus other elements. 308L (L means low carbon content) should be used for stainless with a 308 designation or below. It is recommended that you use the same electrode as the metal to be welded. Stainless to carbon steel usually requires a 309 electrode. L or ELC (Extra Low Carbon) is a plus. Food grade is usually type 316 . Use 316 on it.
Yes. Steel is primarily iron with up to 2.1% carbon added, forming the iron alloy known as steel.
Nothing there both the same
The Formula Of Mild Steel Is The Same As Regular Steel Only The Carbon Content Varies. Mild Steel Usually Contains Less Than 0.25 Percent Carbon; So I'm Assuming The Chemical Formula Is: Fe3C Which Means: 3 Iron (Fe) Atoms And 1 Carbon Atom (C)