they both have to mix with water
To make a 0.02 M solution of EDTA (ethylenediaminetetraacetic acid), first determine the desired final volume of the solution. For example, if you want to prepare 1 liter, weigh out 7.45 grams of disodium EDTA (the disodium salt form is commonly used). Dissolve this in distilled water, then dilute to the final volume of 1 liter. Ensure to mix thoroughly for complete dissolution.
To determine the concentration of hydrochloric acid (HCl) in a new bottle, you can perform a titration using a standard solution of a strong base, such as sodium hydroxide (NaOH). First, you would dilute a known volume of HCl and then gradually add the NaOH solution until you reach the endpoint, indicated by a color change from a pH indicator like phenolphthalein. By applying the titration formula (M1V1 = M2V2), you can calculate the concentration of the HCl based on the volume and concentration of the NaOH used. Additionally, you could use techniques like pH measurement or conductometric titration for more precise results.
Sigma Clean is typically used as a cleaning agent or disinfectant in various settings. To use it, first dilute the product according to the manufacturer's instructions, usually mixing it with water. Apply the solution to surfaces using a cloth or spray bottle, ensuring thorough coverage. Allow it to sit for the recommended contact time before wiping it away or rinsing, to ensure effective cleaning and disinfection. Always wear appropriate protective gear and ensure good ventilation during use.
This is a good question. Open all windows and doors and if you have any electrical fans then use them to move the air around which will dilute those fumes.
One would be a scratch test. The quartzite is much harder than the marble. Another test would be the use of dilute hydrochloric acid, which will cause decomposition of the calcite minerals forming the marble.
Compare and contrast the properties of dilute and concentrated solutions is because you can dilute you solvent into a solution and then you have a concentrated solution.
no
A concentrated solution has a high amount of solute dissolved in a solvent, while a dilute solution has a low amount of solute dissolved in a solvent. This means that concentrated solutions have a high solute-to-solvent ratio, while dilute solutions have a low solute-to-solvent ratio.
The dilute solution become a concentrated solution.
If the amount of solute in unit volume of the solution is high, it is called a concentrated solution If the amount of solute in unit volume of the solution is low, it is called dilute solution
A concentrated solution has a high amount of solute dissolved in a solvent, while a dilute solution has a low amount of solute dissolved in a solvent. The concentration of a solution is usually expressed in terms of mass or volume of solute per unit volume of solvent.
A DILUTE solution is the usual terminology for a less concentrated solution.
the difference between concentrated and dilute is concentrated is larger while dilute is smaller.
Add more solvent.
A dilute solution has a low amount of solute dissolved in the solvent, while a concentrated solution has a high amount of solute dissolved in the solvent. Dilute solutions are more diluted or "weaker," whereas concentrated solutions are more dense or "stronger" in terms of solute concentration.
Dilute solution, a mixture that has only a little solute dissolved in a certain amount of solvent. Concentrated solution-one that has a lot of solute dissolved in the solvent.
A dilute solution has a low amount of solute dissolved in the solvent, while a concentrated solution has a high amount of solute dissolved in the solvent. The concentration of a solution is typically measured in units such as molarity or percentage solute per volume of solution. dilute solutions typically have a lower concentration compared to concentrated solutions.