0
Something that will not let electricity flow through it is an?
Wiki User
∙ 13y ago
Note that "electricity" doesn't flow, only current, which is one aspect of electricity, does. Current is the flow of electrons.
Anything that doesn't allow current is an insulator
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What is the similarities between conductors and insulators?
Conductors and insulators are different and simalar in many ways.Two ways they are simallar are they both have electrons and have something to do with electricity.Three ways they are different that conductors let heat and electricity go through it .On the other hand insulators do not let heat or electreicity go through it easily.Another way is conductors transfer eelectrons easily but meanwhile the insulator psses on electrons with difficulty.One last thing is that conductors are not current but insulators are current. HOPE I HELPED YOU
How is gold used in electronics?
Gold is used as a conductor of electricity on flash drives, USB cables, etc. It plates the metal surface to let the most electricity flow. The question should be why not how. Gold is impervious to oxidation and a very good conductor. So connections are more reliable if made with gold contacts as opposed to copper which oxidizes easily.
What are the release dates for Come on Over - 2006 Let's Wrap Something in Tinfoil - 1.1?
Come on Over - 2006 Let's Wrap Something in Tinfoil - 1.1 was released on: USA:18 October 2006
What are applications of automatic battery charger using scr?
A Silicon Controlled Rectifier, commonly referred to as a SCR, is a semiconductor that allows current to flow through it only after a momentary positive voltage is applied to the gate. It also converts AC energy to DC energy. AC energy, or alternating current energy, sends the electrons in pulses, not creating a direct flow of electrons around the circuit. DC energy, or direct current energy, sends electrons in a steady flow around the circuit. A Silicon Controlled Rectifier has three leads that include the cathode, the anode, and the gate. Their main purpose is to ensure that electrons are flowing the correct way and to limit the amount of electrons that flow through. Before the gate is "opened", or has been touched by a positive current, the Silicon Controlled Rectifier acts as a wall and does not allow electrons to flow through. In a circuit, when wire leads are connected to the anode and the cathode of the Silicon Controlled Rectifier and an open wire lead has potential to be connected to the gate, it has the ability to stop almost all electrons from passing through or to let electrons pass through by touching the open wire lead to the gate. The three leads of the Silicon Controlled Rectifier play a very important role in how it works. An anode is a lead that the current flows into, and a cathode is a lead where the current flows out of. They send the electrons the correct way around the circuit. They also can stop the flow, or continue the flow, of electrons throughout the circuit. When they are connected, but no positive current has been given to the gate, they act as a break in the circuit that allows little light to get through. When electricity is applied to the gate, the electrons flow through the circuit the correct way and in the positive direction. The gate is what allows the Silicon Controlled Rectifier to turn on and send electricity through it. With a simple, direct touch of electricity, the gate opens and allows the electrons to flow through. The only way to stop the constant flow of electrons after the gate has been touched is to stop the circuit or take out the power source. There is no way to turn off the Silicon Controlled Rectifier after it has already been connected momentarily to a positive current of electrons. The gate is what allows the electrons to move directly throughout the circuit, and it cannot be stopped until the power source is disconnected or it shortens out. One example of a technology that a Silicon Controlled Rectifier is used for is a car alarm. When the car is in the state of being locked, and the window is smashed or the door is opened, it sets the alarm off. When you shut the door, the alarm still goes off, because there is no way to cut the power source without the keys to the car. The robber that broke into the car has no way of stopping the alarm unless he or she finds a way to disconnect the power source to the alarm. This is very useful because the alarm will most likely continue to go off, so the owner of the vehicle can be notified of a potential break in. Another example of a piece of technology that a Silicon Controlled Rectifier is used in is a battery charger. A SCR prevents
What does he idom slip through ones fingers mean?
This idiom implies that someone has wasted or ignored something precious that cannot be retrieved or restored. For example: "Jeremy let his youth slip through his fingers, and now he was a bitter man approaching old age alone."
What do you call something that will not let electricity flow through it?
An insulator.
Something that will not let electricity flow through it?
Something that does not allow current to flow is called an insulator. "Electricity" doesn't flow, only current, which is one aspect of electricity, does. Note, current is the flow of electrons.
What is the nine letter word for something that doesn't let electricity flow through it?
insulator
Something that will not let electricity flow through it is a?
Note that "electricity" doesn't flow, only current does, which is one aspect of electricity, does. Current is the flow of electrons. Bad conductor of current, or an insulator.
What is something what will not let electricity flow in a circuit is an?
Insulator
Does your body let electricity flow through it?
yes
What will not let electricity flow through it?
Diamonds don't. <<>> The term you are looking for is an insulator.
Are insulators made of materials that electricity can flow through easily?
If you're talking about electrical insulators, then no, as an electrical insulator does not let electricity through.
If something does not conduct electricity what does it mean?
it means its outer shell of the atoms that make up that matter do not let electrons flow freely from one atom to the next (its an insulator). electricity is the flow of electrons from one atom to the next. hope this helps
Something that wont let electric flow through it is an?
insulator
What do you call something that does not let heat flow through it?
A thermal insulator.
What is an example of electricity?
Rubber and wood are good electrical insulators because they don't let electricity pass through them.The best insulators in the world are uranium hexafluoride - used as the dielectric in UHV machines and also Barium Titanate [BaTiO(4)] Better to say that they resist the flow of charge - rather than 'don't let electricity flow through them'.
