Thread repair generally depends on the material, whether it is an internal or external thread, and how badly damaged the thread is. If it is an external thread such as on a bolt or stud, you may use a small triangular file to smooth out any high spots in the thread. Place the edge of the file in the thread and move slowly and firmly around the contour of the thread. In this manner you will be less likely to damage other threads. There are also special tools called thread chasers that work very well. Another alternative, short of replacing the damaged piece is use an old thread cutting die. Since many of today's nuts and bolts are formed rather than cut, an old die will push the damaged threads back in place rather than try to cut new threads. Internal threads can be repaired in the same way by using a tap rather than a die. If the internal thread is in aluminum or cast iron such as an engine head, cylinder block or transmission case, use extreme caution while attempting to repair these threads. Go slow and use plenty of oil. In some cases it is better to take the part to a machine shop and let them repair the damage. Finally a word of caution. DO NOT attempt to repair pipe threads. These are designed to hold pressure, and any damage will cause a leak.
Over-grazing and cutting down trees for fuel
Quartz in fine particles can cause lung conditions when inhaled.
The main cause of nuclear, biological, and chemical (NBC) fires typically stems from the release of hazardous materials during accidents or attacks involving NBC agents. These substances can ignite due to heat, chemical reactions, or external ignition sources, leading to fires that can spread rapidly and cause widespread harm. Additionally, the environment and conditions, such as humidity and temperature, can influence the behavior and severity of these fires. Proper containment and response measures are crucial to mitigate their effects.
it depends on medical conditions and how bad the hoarding is. it is possible, but it isn't likely to get a heart attack from such things.
Sensations or perceptions without an external cause are typically referred to as hallucinations. Hallucinations can be experienced through any of the five senses and are often associated with conditions such as psychosis, dementia, or substance abuse. Treatment for hallucinations may involve addressing the underlying cause and may include medication or therapy.
Flooding.
cutting to much trees will cause deforestation,desertification and overgrazing. this will also cause less oxygen.
A cracked or broken piston will cause a loss of compression, as will cracked or broken rings. The failure of a head gasket will also cause a loss of compression, as will broken, cracked or badly worn valves or valve seats. A crack in the cylinder itself (either the sleeve or the engine block), or a crack in the head itself will cause a loss of compression. A problem with the plug threads or the threads in the head (for engines that have plugs) can cause loss of compression, and injectors (for engines that have them) can leak around the threads, either because the injector threads or the threads in the head have been damaged.
Most common is genetic, but external conditions can also do it. In utero its most often drugs, with alcohol as the number one culprit.
no cutting yourself wont make you dizzy but it can cause internal bleeding
Cause you are RIDICIOUSLY EMO and STUPID
Cause their hard
Thread repair generally depends on the material, whether it is an internal or external thread, and how badly damaged the thread is. If it is an external thread such as on a bolt or stud, you may use a small triangular file to smooth out any high spots in the thread. Place the edge of the file in the thread and move slowly and firmly around the contour of the thread. In this manner you will be less likely to damage other threads. There are also special tools called thread chasers that work very well. Another alternative, short of replacing the damaged piece is use an old thread cutting die. Since many of today's nuts and bolts are formed rather than cut, an old die will push the damaged threads back in place rather than try to cut new threads. Internal threads can be repaired in the same way by using a tap rather than a die. If the internal thread is in aluminum or cast iron such as an engine head, cylinder block or transmission case, use extreme caution while attempting to repair these threads. Go slow and use plenty of oil. In some cases it is better to take the part to a machine shop and let them repair the damage. Finally a word of caution. DO NOT attempt to repair pipe threads. These are designed to hold pressure, and any damage will cause a leak.
Yes, cutting grass can cause allergies because it releases pollen and other allergens into the air, which can trigger allergic reactions in some people.
No , but lean conditions can cause the misfire
In general, normal cold weather does not affect wireless signals. However, extremely cold weather could cause issues for external antennae that are exposed to conditions.