answersLogoWhite

0

What else can I help you with?

Related Questions

What can you use bonded fabric for?

you can use bonded fabrics for making disposable products and its cheap!


How do you take shackle off nu-set 3 letter lockbox?

For 2020 series model, the key lock for the shackle is located inside the vault. Unlock the lock box lid with last combination preset and use the "Reset Key" provided to release the shackle. For 2040 series model, the combo lock for the shackle is located on the top of the lock box. Unlock the lock box lid with last combination preset and press the "Release Button" provided to release the shackle. Visit http://www.nusetlock.com or call toll-free 800-60-NUSET for details.


What is the difference between a shackle and a clevis?

A "clevis and pin" are a type of shackle, the clevis is the U shaped part, when you have both the clevis and pin together it would form a shackle. There are many types of shackle assemblies and many of them use a clevis. If you had a lifting strap with a loop on the end you would put the clevis on the loop, secure the pin, and now the shackle would be in place. I hope this makes sense.


What are some kinky things for lesbians to do?

Lesbians can use dildo's They can use my handcuffs and shackle's. They can come over to my house and let me video tape them.


What primer to use on spackle?

Primers of all sorts are fine over shackle. The most commonly used and available is latex primer.


How do you reset delsey 3 digit combination lock?

you can't, but you can change the combination.1:Pull the shackle upwards and turn it 90 degrees anticlockwise.2: Press the shackle firmly into the body of the padlock and without releasing the pressure, turn it 90 degrees anticlockwise.3: set your new code by turning each thumbwheel.4: Turn the shackle 890 degrees clockwise until you hear a "click"5: Pull the shackle upwards. Your padlock is now ready for use. To change your code, repeat operations 1-5.


On a 2004 Jeep Liberty where is the rear lift points on the frame for use with a floor jack?

I lift them on the frame rail next to the leaf spring shackle.


What did the Maryland colony did to supply laborers for the plantation fields?

use slaves and servants insead


Why would a landowner rather use instead of indentured servants?

A landowner might prefer to use wage laborers instead of indentured servants because wage laborers provide more flexibility and control over the workforce. With wage laborers, the landowner can hire and fire workers as needed without being bound by the terms of a contract like with indentured servants. Additionally, wage laborers may have more experience and skills that can benefit the operations of the landowner.


Where did Hawaii import their workers from in the 1800s?

The first contract laborers came from China. The use of Japanese laborers began in 1885 and five years later the standard labor source was Puerto Rico.


How do you Reset 3 digit combination on Austin house lock?

this works when you know the combination. if you don't know it, then you are up a creek without a paddle.step 1. open lock using current combination.step 2. spin the shackle (the u shaped piece which clicks into the lock case) 90 degrees to the case. there should be a little bump in the shackle which will line up with a groove in the top of the case. this only works on one side so check to see where the groove is.step 3. push and hold the shackle down as if you were closing it.step 4. change the combination.step 5. pull the shackle up and use the lock with its new combination.


How does a survival bracelet shackle work?

Well the purpose of the survival bracelet is to hold a safety rope with you in case you ever are in the need of it in a emergency situation. Its a compact and fashionable way of caring it around. The shackle is just to tie it down but you can also use other means to do that, like a monkeys fist, a plastic clip, and "S" hook, etc.