current decreases and resistance increases
The Series circuit is a single path for current flow. like Christmas tree lights, one part of the path is obstructed (a light that's bunt out ) they all go out. Parallel circuits have more than one path for the current flow, so if one path is obstucted, the current can take another path (like rungs of a ladder )
An ideal voltmeter has infinite impedance(resistance). If you were to break the circuit and put it in series and try to make a measurement, it is easy to see that the circuit would act completely differently and your measurement would be wrong. An ideal ammeter is always connected in series because it has 0 resistance, so all of the current would flow through it, and not through the wire that you are trying to measure the current of.A better answer though is to think about what you are trying to measure. When you say something is 3 Volts, that is a difference between the voltages at two different points. If you want to see what the voltage drop across a resistor is, for example, you need to put one probe of the voltmeter on one side of the resistor and the other probe on the other side of the resistor. That setup is simply called being in parallel.Voltage is potential difference between two points, hence measured across or in parallel, where as current is measured in series since current flows (*)
What is a fitness circuit? a fitness circuit is were it makes u fit and healthy. Is a circuit breaker a circuit? No, it is an inherent part of the circuit. In simple terms and condtion
Obstruction Lights
To pass current very easily from one part of a circuit to another.
A parallel circuit.
parallel circuit
Well, in order to have both a series part and a parallel part in your circuit,I'd say the circuit must have at least threecomponents.
A series/parallel circuit.
In a series circuit, current has to pass through each part of the circuit. In a parallel circuit, the current has several alternative paths.
Only if you install separate switches for each part of the circuit. The whole point of a parallel circuit - is that both parts of the circuit are controlled by the same switch.
Generally, a circuit with multiple paths is called "parallel" because of the structure of the wiring involved. Parallel circuits have identical voltage on all paths, while current through each path is variable; whereas series circuits, having only one path, has constant current, but variable voltage.
um.. a switch is a part of a series circuit because parallel circuits don't have switches
Series circuit: elements are connected one after the other; the current (the electrons, or other charge carriers) has to pass through each of the elements in turn. Parallel circuit: elements are connected in such a way that part of the current will pass through one circuit element, part through the other.
• In a parallel circuit, there are junctions in the circuit so the current can flow around the circuit in more than one way. • In a series circuit the current decreases as more bulbs are added. •In a parallel circuit, as more bulbs are added, the current increases. • This is because bulbs added in parallel offer less resistance
The current branches, so that part will go through one branch of the parallel circuit, and part through the other branch. (It is also possible to have more than 2 branches.) Then it joins again.
In a series circuit each light completes its part of the circuit and connects to the next light. So, if one light fails, the circuit is broken and the flow of current to all lights must stop.