0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What are the ratings and certificates for The Helix--- Loaded - 2005?
The Helix--- Loaded - 2005 is rated/received certificates of: USA:R
What is the motto of Helix High School?
Helix High School's motto is 'Once a Scottie, Always a Scottie'.
What is Helix dragos DNA code?
r3w4fd4d43
What fossil turns into Omanyte?
the helix fossil
What are the release dates for Helix - 2014 Bloodline 1-8?
Helix - 2014 Bloodline 1-8 was released on: USA: 21 February 2014
What is angle of helix in helical spring?
The angle which the axis of the spring wire makes with the horizontal line is known as helix angle.
What are helicle gears?
helical gears offer a refinement over spur gears. The leading edges of the teeth are not parallel to the axis of rotation, but are set at an angle. Since the gear is curved, this angling causes the tooth shape to be a segment of a helix. The angled teeth engage more gradually than do spur gear teeth. This causes helical gears to run more smoothly and quietly than spur gears. Helical gears can be meshed in a parallel or crossed orientation. The former refers to when the shafts are parallel to each other; this is the most common orientation. In the latter, the shafts are non-parallel. For a crossed configuration the gears must have the same pressure angle and normal pitch, however the helix angle and handedness can be different. The relationship between the two shafts is actually defined by the helix angle(s) of the two shafts and the handedness, as defined: : : Where β is the helix angle for the gear. The crossed configuration is less mechanically sound because there is only a point contact between the gears, whereas in the parallel configuration there is a line contact. Quite commonly helical gears are used with the helix angle of one having the negative of the helix angle of the other; such a pair might also be referred to as having a right-handed helix and a left-handed helix of equal angles. The two equal but opposite angles add to zero: the angle between shafts is zero -- that is, the shafts are parallel. Where the sum or the difference (as described in the equations above) is not zero the shafts are crossed. For shafts crossed at right angles the helix angles are of the same hand because they must add to 90 degrees.
What is the meaning of helical?
Of or pertaining to, or in the form of, a helix; spiral; as, a helical staircase; a helical spring.
What shape can be said to be 'helical'?
When one uses the term "helical", one is often referring to the shape of a helix or spiral. An object with a spiral or helical shape, is one that has a shape or form similar to the helix.
What is a helical protein?
"Helical" refers to its structure -- a helix (a spiral). See the related link below for an image.
Why is double helix structure of DNA important?
#Herringbone gears are a type of double helical gear, meaning that they have both a left hand and right hand element to cancel thrust or side loading on their bearings. A true herringbone has a 30° helix angle, 20° transverse pressure angle, and an AGMA stub whole depth factor. They may have a center groove between the two hands, but this is not absolutely necessary. Herringbone gears are cut on specialized machines that cut both hands at the same time, precisely locating the apex of the two helixes.#The double helical form balances the inherent thrust forces.[Double helical gears, invented by André Citroën and also known as herringbone gears, overcome the problem of axial thrust presented by 'single' helical gears by having teeth that set in a 'V' shape. Each gear in a double helical gear can be thought of as two standard, but mirror image, helical gears stacked. This cancels out the thrust since each half of the gear thrusts in the opposite direction. They can be directly interchanged with spur gears without any need for different bearings.Where the oppositely angled teeth meet in the middle of a herringbone gear, the alignment may be such that tooth tip meets tooth tip, or the alignment may be staggered, so that tooth tip meets tooth trough. The latter type of alignment results in what is known as a Wuest type herringbone gear.With the older method of fabrication, herringbone gears had a central channel separating the two oppositely-angled courses of teeth. This was necessary to permit the shaving tool to run out of the groove. The development of the Sykes gear shaper now makes it possible to have continuous teeth, with no central gap.]#Double helical gears give an efficient transfer of torque and smooth motion at very high rotational velocities.#A disadvantage of herringbone gears is the high cost due to special gear shaping equipment and special cutting tools.-Also during assembling a gear box ,aligning is to be given special attention
A helix refers to a proteins structure?
Protein is a chemical family name. Its shape may be helical. But a helical shape is of a spring type item shape.
Does glycogen and amylopectin have a helical structure like amylose and if yes why is it that glycogen and amylopectin form red-violet colouration with potassium iodide?
Yes, they are helical. The change in colouration is due to iodine being trapped in the helix. Difference in colour is due to the different wavelength of light being absorbed when iodine form bonds with the glucose molecules in the helix.
What shape does a DNA Molecule have?
DNA molecule is shaped like a spiral staircase and is composed of two parallel strands of linked subunits.
What are helical springs?
Helical springs are the typical, common, wound springs used in tension or compression. The term 'helical' comes from the spring being a helix- the wire is wound around a mandrel, advancing along the length of the mandrel as it is wound.
How is the staircase a symbol of genetics in the movie gattaca?
They are helical in their structure; they look like a strand of DNA (the double helix.)
How do you calculate the pitch of a helix from a given helical slope?
The slope is the pitch divided by the developed circumference of the helix which is pi x diameter. Pitch = pi x diamter x slope
