answersLogoWhite

0


Best Answer

it is for lighting a LCD screen like a backlight

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is a LCD Inverter board for?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Whats wrong with a laptop when the screen is blank but the computer is on?

Take a closer look at the LCD screen. Can you see a very dim image on the screen? If you can, most likely there is a problem with the inverter board. The inverter board is a power supply for the LCD screen and when it goes bad the screen looses backlight. The inverter board is located inside the laptop display. In order to replace it you'll have to open up the display panel.


Matsui lcd television inverter board fault back light not working?

how do i remove shadow from televison screen


When an LCD panel is very dim and brightness adjustments don't help what component is likely to be the problem?

The inverter. The inverter converts DC to AC used to power the back- lighting of the LCD panel. Check with the notebook manufacturer to confirm that it makes sense to first try replacing just the relatively inexpensive inverter board before you replace the more expensive entire LCD panel assembly.


What are the symptoms of a broken LCD inverter?

Usually if your LCD monitor's inverter is broken, the monitor's blacklight starts to flicker or goes off.


What is an inverter board?

"inverter" has many uses, but here I think you mean a circuit to convert one DC voltage to another by INVERTING the input DC to AC, running thru a transformer, rectifier, regulator to output the new DC voltage. When used in context as an "inverter board" it refers to the backlight of an LCD screen. It is the board(s) that the backlight(s) is mounted on.


Where can one purchase an LCD inverter?

The best place to buy an LCD inverter is at a local electronics store. If they do not stock that item, online is the next best choice. Amazon or eBay have a wide range of affordable products to suit anyone's needs.


What should you do if the LCD panel is unreadable characters are missing or incorrect characters appear?

Check or replace the video inverter card. Try reseating the LCD connector inside the notebook Replace the LCD assembly


Screen goes black on Samsung 40 in LCD TV for a few seconds and then goes back on?

This is a common problem for all LCD screen TV. LCD Screen Goes black after a few seconds of turning ON. repeat ... and still the same. You have a faulty inverter causing the back light of the LCD not functioning. Check for a bloated capacitor on the power supply and inverter circuit board. This capacitors can be seen visually by looking the top of the capacitors. If it is not flat these capacitors might be the problem. If you tested it with a multi tester it is OK, but if the TV is power on , capacitors is no longer working as normal. try replacing the bloated capacitors. Also, there are some capacitors that may have causing the problem. Try to replace the high voltage capacitors (light blue in color) located in the inverter circuit board. replaced all $ or 5 pcs capacitor. usually the value are 12pf by 3KV and 4.7KV by 3KV. Goodluck. !! Benjie Ramos (Philippines)


How do you manually replace a broken lcd screen for Toshiba Laptop?

Here are the simply steps you should follow to Remove LCD screen from Toshiba Laptop: 1. Remove two LCD mask seals. Remove two screws hidden under seals.2. Put your fingers between the mask and the LCD screen and carefully release the mask latches.3. Remove the mask. Do not hurry; twist the mask slightly to release latches.4. Remove the mask screw seals on each side of the display assembly. Remove screws.5. Remove the securing tape from the display connector. Disconnect the display cable. Remove the screw securing the FL inverter.6. Lift off the FL inverter board. Disconnect FL inverter cables on both ends.


Where to buy an LCD screen inverter for Fujitsu LifeBook A series?

I would Google it (search). Usually I buy them off Ebay.


How do you test for a faulty back light on a LCD panel?

Usually you can take the lcd have a bright light nearby have something displaying to the screen hold it at an angle and see if you can make out anything that looks like the normal display. At least this is how I normally do it. I have noticed however that the inverter board is far more likely to burn out over time don't over look it.


What are the three FRUs of the video subsystem?

The three parts are the video inverter, video card, and display (LCD). This answer is assuming you are talking about laptops.