A parallel circuit is a circuit that takes both legs to make a load.
Parallel circuits are used when there are many electronics on the same circuit, such as Christmas lights, for example. If they were on a series circuit, if one bulb went out all of them would go out. In your home, parallel circuits allow you to turn any electrical device on or off, independently of the others.
parallel circuits can be used for lots of things.Things such as : . Christmas tree lights False for A+
Series circuit gives higher resistance compared to parallel circuit.
AnswerInductances add in series, so the formula is simply L=L1+L2. Inductance is handled in the same manner as resistance in serial and parallel circuits.
Yes, Kirchhoff law is applicable to linear circuits. In fact, both of Kirchhoff'slaws are applicable to ALL circuits, because they're just conservation laws.
There are three disadvantages of parallel circuits. These include the fact that they have complex resistance, voltage that is limited, and a current that varies.
No. Parallel circuits are not fuses. Fuses can be used to protect parallel circuits.
There are three disadvantages of parallel circuits. These include the fact that they have complex resistance, voltage that is limited, and a current that varies.
there are 2Series circuits and parallel circuitsFurther AnswerThere are, in fact, four categories of circuit: series, parallel, series-parallel, and complex. 'Complex' includes any circuit that's not one of the other three.Series and Parallel
The types of circuits are series and parallel!
parallel circuits
There are three disadvantages of parallel circuits. These include the fact that they have complex resistance, voltage that is limited, and a current that varies.
FEEDBACK CIRCUITS. In addition to parallel and series circuits, there are also closed and short circuits.
Parallel circuits normally have more than one resistor. Basically parallel circuits are circuits where the current has more than path to follow. However, there are parallel circuits where there are two switches rather than two resistors.
that is called a perfect circuit
Yes, the current in both circuits is the same when they are connected in parallel.
Parallel for main circuits and series parallel for lighting circuits.