It depends a bit on how well compacted the powder is but a common number for uncompacted powder would be 0.8 g/cm³.
no the powder toy does not have virus's
The duration of Fine Powder is 1.33 hours.
In Hindi turmeric powder is called as haldi.
Sleep Powder is not a TM move in any Generation.
The water will change it's color and taste.
The ratio of bentonite powder to construction water needed to achieve a density of 1.2 will depend on the specific properties and particle size distribution of the bentonite powder being used. It is recommended to conduct small-scale tests to determine the exact ratio required for your specific mix design. Starting with a 5-10% bentonite powder to water ratio is a common practice, but adjustments may be needed based on actual test results.
I want to use bentonite powder in place of salt and char coal for earthing of distribution Transformers and electrical lines
40%
The number of bags of bentonite in 1m³ depends on the bag size and the density of the bentonite. For example, if you have 25 kg bags and the density of bentonite is approximately 1.5 kg/L, then 1 m³ would contain about 1,500 kg of bentonite. Dividing 1,500 kg by 25 kg per bag gives you roughly 60 bags. Adjust the calculation based on the specific bag size and density used.
To increase the density of soil so that it cant mix with water.
The composition of backfilling compound for chemical earthing typically includes a mixture of bentonite, salt, and graphite. Bentonite is used for enhancing conductivity, while salt helps in maintaining low resistance levels. Graphite is added to improve the overall performance and longevity of the earthing system.
What is the density of whey powder?
Depending on its density (which can vary) ti should weigh about 5 pounds
it may be 25 kg per pole
There is no exact answer as the true value depends on water content. it will be in the range of 1.09 (dry) to 1.83 (saturated)
1.368
1.368