The induced current is proportional to applied voltage. i is proportional to v
Or you might say, "A current source drives a fixed current through a circuit. Then the voltage developed is proportional to i" . Both forms are equally correct. Voltage sources are more common than current sources so the first form is more common.
V=IR, voltage is directly propostional to current and resistance (by ohm's law).CommentVoltage is not 'proportional to resistance'. Resistance is a constant, and is not affected by voltage at all.
Current is proportional to the potential difference and inversely proportional to resistance. Ohm's law: Current equals voltage divided by resistance
This is related to control system and process control topic. Proportional integral is the mode that result from a combination of the proportional mode and the integral mode.
inverse of frequencyAnswerReactance is inversely-proportional to frequency of the supply, and the capacitance of the capacitor.
Ohm's law states that "The current is directly proportional to the applied EMF (voltage) and inversely proportional to the resistance in the circuit." <<>> if resistor exists, resistance decreases according to ohm's law, current is directly proportional to voltage and current is inversely proportional to resistance it means as current increases, voltage increases. resistance increases, current decreases so as voltage if there is no resistor, there should be no resistance except internal resistance of voltmeter and ammeter
Because it doesn't have any good thing to me
Directly proportional relationship is F=ma, F is directly proportional to a. Inversely proportional relationship is v=r/t, v is inversely proportional to t.
Yes, due to ohms law. Current, resistance and voltage are all directly proportional. V=IR; I=V/R; & R=V/I
Yes, that is correct.
Current and Voltage are directly proportional. V=voltage, I=current, R=resistance V=I*R
you have to times and get the answer correct or not
Current is inversely proportional to resistance, this comes from the ohms law. V=IR If we keep the voltage as constant then Current will be inversely proportional to resistance
millivoltmeter has more ressistance.By ohm's law V=IR. if we assume that I is constant then V proportional to R as the millivoltmeter has more voltage as compared to micro-voltmeter , the milli voltmeter has greater resistance
Okay. Resistance by ohms law is given by R = V/I But Power P = V * I Dividing R/P = 1/ I 2 Or R = P / I squared For a constant power, resistance is inversely proportional to I squared and not simply proportional to.
kinetic energy is proportional to square of speed. ke=.5m*v*v
Watts. V*A=W
Specific resistivity is directly proportional to area of cross section of the conductor and specific conductivity is the inverse of specific resistivity. So we can say , Specific conductivity is directly proportional to area of cross section of the conductor.