bioreactors involves organisms or plant cells etc. for conversion and cr nt
There's no difference between the GPS system used in tractors - and that used in 'regular' cars. The tractors are simply fitted with a computerised steering mechanism which keeps the reactor in a straight line while ploughing, reaping etc. The steering system takes data from the GPS device and makes course corrections as needed.
reactor free
The arc reactor.
A cylindrical reactor consists of a cylinder and a head. The cylinder and the head have flanges and a gasket seal; the head is attached to the cylinder by a set of 8 three-quarter inch stainless steel bolts. There is a gasket between the two flanges and a Bourdon gauge attached to the cylindrical portion (not shown). The inside of the reactor is 18 inches in diameter.
Juno Reactor is known for their orchestra symphonic approach with global influences. Some of their song titles include Song To The Siren, Song For Ancestors, and Immaculate Crucifiction.
A nuclear reactor uses either nuclear fission or nuclear fusion to generate electricity, while bio-reactors use the excretions of many animals to generate electricity.
Chemical reactor engineering is the overall discipline that uses CFD, computational fluid dynamics, as part of the necessary problem-solving data.
a nuclear reactor converts binding energy into heat. a nuclear power plant uses a nuclear reactor to generate electricity.
Homogeneous reactor- the reactor where one phase exist for both the reactants. Hetrogenous reactor - the reactors where more than one phase exist among the reactants gas-liquid-solid.
The overall basic difference is the ability to obtain widely varying performance for the reactor depending on the amount of recycle sent back to the plug-flow reactor (PFR).The equations do not lend themselves to typing. For a comprehensive overview of the subject see p.296-297 of Chemical Engineering Kinetics & Reactor Design by Charles G. Hill.
The primary difference between a pressurized water reactor (PWR) and a boiling water reactor (BWR) is that in the BWR, water is actually boiled, and the steam is used to drive a steam turbine, while in the PWR, the primary coolant is not allowed to boil, but is circulated in a closed loop to boil water in a steam generator. The BWR circulates primary coolant through the steam turbine in a closed loop. The PWR contains the primary coolant in a loop that includes the steam generator, and not the steam turbine.
Nuclear reactions in a nuclear reactor are controlled reactions. The reactions in the atomic bomb are not controlled reactions
Residence time in a chemical reactor refers to the average time a substance stays inside the reactor. For example, if a chemical reaction takes 10 minutes to complete in a reactor with a volume of 100 liters, the residence time would be 10 minutes.
An example of residence time calculation in a chemical reactor is determining the time it takes for a reactant to completely react inside the reactor. This calculation helps in optimizing the reactor design and process efficiency.
In residence time calculation for a chemical reactor, factors such as reactor volume, flow rate of reactants, and reaction kinetics are considered. These factors help determine the time it takes for reactants to stay inside the reactor and undergo the desired chemical reactions.
The residence time in a chemical reactor system is calculated by dividing the volume of the reactor by the volumetric flow rate of the reactants. This calculation helps determine how long the reactants stay in the reactor before exiting.
Reactors are vessels specifically designed for carrying out chemical reactions, often with controlled conditions such as temperature and pressure. Vessels are generally containers that can hold a variety of substances, including reactors. Reactors are a type of vessel that is specialized for chemical processing.