Basically the semi-conductor junctions are a larger surface area and heat sinks are part of the design to dissipate heat.
The difference in the 1N4007 diode and the 1N4007S diode is the voltage. The 1N4007S has a higher voltage but the meaning of the S is not listed.
diodediode conducts by applying certain voltagephoto diodephoto diode conducts when it is exposed to sun light
there are two types:- 1) simple diode detector 2) practical diode detector the diode is common device used in am demodulator. signal(am demodulator signal ) is applied anode and output is taken from cathod
A: A LED is a diode and like all diode they have an [anode] meaning positive terminal and a [cathode] negative terminal. Therefore the proper potential must be applied for it to behave like an LED.
When a diode is made (ie. NO current pass through the diode) then depletion layer is form between N & P.
the cut in vol for silicon diode is 0.7 where as germaium is around 0.3 because of their construction( the ratio of majority n minority carreirs)
difference between detector and diode
the cut in vol for silicon diode is 0.7 where as germaium is around 0.3 because of their construction( the ratio of majority n minority carreirs)
The difference in the 1N4007 diode and the 1N4007S diode is the voltage. The 1N4007S has a higher voltage but the meaning of the S is not listed.
Zener diode is heavily doped pn junction diode.
gunn diode is transfered electron device & PIN diode is semiconductor device
what is the difference between reverse characteristics of zener diode and a practical diode ?
The simple switch conducts in both directions. The ideal diode conducts in only one direction.
diodediode conducts by applying certain voltagephoto diodephoto diode conducts when it is exposed to sun light
potentiometer is not sensitive to lightpotentiometer has three terminals, diode has two
The difference between the pn-junction diode and the zener diode is that the pn-junction diode is used for rectification while the zener diode is used for rectification and stabilization. Also, the zener diode can function in the breakdown region while the pn-juntion diode can not function in that regime.
the current in mosfet is controlled by electric field where as in poto diode is controlled by intensity of light