they should average 32" to 36" from the front of a tread or the surface of the porch or deck.
Measure from the nose and the top of the tread of the plumb up the wall 34' to 36'
This literally differs city to city: you have to check your local building code to know for sure. The ideal height is 33" with an acceptable range of 3". In other words it can be anywhere between 30" and 36" above the nose of the tread to the top of the rail. But if you want to be sure and be "legal" in your area, check with the local building inspector.
It is the length and width of your HAND
There is no average height for a fencer. Although, people who fence epee are generally tall.
The appy ranges in height from 14.3 hands to 16+ Depending on breeding. I would think they average in the 15 hand range.
36 inches
1100mm minimum.
Is there a standard high of the rail on a pontoon boat
The recommended height for chair rail installation is typically between 30 to 36 inches from the floor. Chair rail should be placed at a height that is visually appealing and practical for protecting walls from chair backs and other furniture.
Measure from the nose and the top of the tread of the plumb up the wall 34' to 36'
this is simply known as the 'lower dash rail'
banister
It can be anywhere between 36 and 42 inches.
The standard chair rail molding height for a room with 8-foot ceilings is typically around 30 inches from the floor.
The most common rail currently used is 141 AREMA with a height of 7-7/16". There are over 20 rails still used in the US (9 still in production) Outside of the Class 1 railroads 115 AREMA is very common with a height of 5-1/2"
Yes Paul rodriguez was the first to land this trick on a hand rail
No.