0
What else can I help you with?
Which relation is there between wavelength and height?
There is no relation between wave length and wave height. You can change the wave height independently from the wave length. Wave height tells you which amplitude the wave has. If you think of sound that means how loud it is. The wave length tells you the pitch or the frequency of this sound, that means high or low sound. Long wavelength means bass sound and short wavelength means treble sound.
What is the wave base of a wave 10 feet in height?
The wave base is typically defined as half the wavelength of a wave. For a wave that is 10 feet in height, the wavelength can vary, but a common approximation is that the wavelength is about 10 to 15 times the wave height. Using this approximation, the wavelength could be around 100 to 150 feet, making the wave base approximately 50 to 75 feet deep. Thus, the wave base for a wave of 10 feet in height would be roughly 50 to 75 feet below the water's surface.
What is the correct height for an antenna receiving in the 160-170 kHz range?
For receiving signals in the 160-170 kHz range, an ideal antenna height is typically around one-quarter wavelength of the frequency being received. This corresponds to approximately 450-460 meters (about 1,475-1,500 feet) since the wavelength at these frequencies is around 1,800 meters. However, practical considerations often lead to shorter antennas, which can still be effective with proper design and tuning. Ground effects and surrounding structures can also significantly impact reception quality.
What determines the height of a wave?
Make a graph above zero mark 5 points distanced 1cm each from other. mark below zero the same but with negative sign. Any wave always have a positive or a negative or together cycle. the individual is called "half cycle" and whole is called "full cycle". Now, the contact of each wave's frequency above and below the zero; this distance is called as the length of the wave. If, you are looking for how long will it travel then it depends on its wavelength. Also, a separate carrier signal is used to carry it long distance.
What is ture of the relationship between frequency and wavelength?
Wavelength lambda and frequency f are connected by the speed c of the medium. c can be air = 343 m/s at 20 degrees celsius or water at 0 dgrees = 1450 m/s. c can be light waves or electromagnetic waves = 299 792 458 m/s. The formulas are: c = lambda x f f = c / lambda lambda = c / f
What are the example of variables?
Height, weight, wavelength of light.
Is the ratio of height to wavelength the same for both waves?
No, the ratio of height to wavelength differs for different waves. The height of a wave is the distance between its crest or trough and the rest position, while the wavelength is the distance between two consecutive crests or troughs. These characteristics vary depending on the type of wave.
What are the example of continuous variable?
Height, weight, wavelength of light.
Is The wavelength of a wave measures the height of each crest?
No. The wavelength is the distance, or separation, between each crest.
How do the wavelength and wave height change as a wave enters shallow water?
As a wave enters shallow water, the wavelength decreases while the wave height increases. This happens because the wave encounters the ocean floor, causing the wave to slow down and compress, resulting in a shorter wavelength and higher wave height.
What are the differences between wave height and wavelength?
Wave height refers to the vertical distance between the crest (top) and the trough (bottom) of a wave, while wavelength is the horizontal distance between two consecutive crests or troughs of a wave. Wave height measures the amplitude of a wave, while wavelength measures the distance between wave cycles.
Which relation is there between wavelength and height?
There is no relation between wave length and wave height. You can change the wave height independently from the wave length. Wave height tells you which amplitude the wave has. If you think of sound that means how loud it is. The wave length tells you the pitch or the frequency of this sound, that means high or low sound. Long wavelength means bass sound and short wavelength means treble sound.
What are the four parts of a wavelength?
The four parts of a wavelength are peak, trough, amplitude, and wavelength. The peak is the highest point of a wave, while the trough is the lowest point. Amplitude refers to the height of the wave from the baseline, and wavelength is the distance between two consecutive peaks or troughs.
If a wave has a height of 5 feet and a wavelength of 10 feet what is the wave base?
Tha wave base would be about 5 feet, as it is about 1/2 of the wavelength.
What happen to wavelength when you vary amplitude?
Changing the amplitude of a wave does not affect its wavelength. Wavelength is the distance between corresponding points on a wave and is determined by the frequency of the wave and the speed at which it travels through a medium. Amplitude, on the other hand, represents the height of the wave and does not impact the wavelength.
What is the wave base for a wave with a height of 5 feet and a wavelength of 15 feet?
A wavelength of 15 feet yields a base of about 7.5 feet. The wave base of a wave (the depth to which it moves water) is about 1/2 the wavelength.
Is there a direct correlation between amplitude and wavelength?
No, amplitude and wavelength are independent properties of a wave. Amplitude refers to the height of the wave, while wavelength is the distance between two corresponding points on a wave. They do not have a direct correlation, as changing the amplitude does not affect the wavelength, and vice versa.
