When did dinosaurs become extinct ?
The largest bucket truck that I have worked in was 125' Mat 3 and 120' Altec exten.
A standard 6-gallon bucket typically stands about 14 to 16 inches tall, with a diameter of approximately 12 inches. The exact height can vary slightly depending on the manufacturer and design. These buckets are commonly used for various purposes, including gardening, cleaning, and storage.
The duration of The Bucket List is 1.62 hours.
his name is charlie. hence the title name "charlie and the chocolate factory" but the dude who owns the factory is willy wonka
Cuz u stole itz bucket. GIVE IT ITS BUCKET BACK!
The largest bucket truck that I have worked in was 125' Mat 3 and 120' Altec exten.
Bucket trucks are used for jobs that required height extension like fixing power lines.
Assuming sides of your bucket are straight, then it is the height of the bucket multiplied by the area of the base.The volume of a bucket depends on the size of the bucket. Measure the inside width (diameter) of the bucket and find the radius of the bucket by dividing the diameter by 2. If the sides of the bucket slope, measure the diameter at the mid-point of the side. The volume of the bucket is pi (approximately 3.14) times the square of the radius times the inside height of the bucket. For example, if a bucket is 12 inches across and 15 inches high, the volume is 3.14 x 6 inches x 6 inches x 15 inches = 1696 cubic inches
To increase the potential energy of a bucket of water sitting on a bench, you can raise the height of the bucket by placing it on a higher platform or lifting it higher above the ground. This will increase the gravitational potential energy of the water in the bucket.
Please specify what you want to measure about the bucket, for example its height, width, circumference, volume, color, albedo, etc.
Aerial bucket trucks use a hydraulic lift to put workers at a desired height. One worker stays in the bucket on the exterior of the vehicle while another rides inside to operate the truck.
Volume of the bucket = 1/3*pi*h*(r12 +r1r2 +r22) Where h- height of the cone r1 , r2- radii Also refer: http://mathworld.wolfram.com/ConicalFrustum.html
Bucket 1 Bucket 2 Bucket 3 Bucket 4 Bucket 5 Bucket 5 Bucket 7 Bucket 8 Bucket 9 Bucket 10 Bucket 11 Bucket 12 Bucket 13 Bucket 14 Bucket 15 Bucket 16 Bucket 17 Bucket 18 Bucket 19 Bucket 20
Is this a trick question? If you have a narrow bucket that holds 60 liters than it would seem very tall but if you have a wide flat bucket that holds 60 liters, it would be a different height or how wide.
You can increase the potential energy of the bucket of water by raising it to a higher height on the bench, thereby increasing its gravitational potential energy. Alternatively, you can increase the mass of the water in the bucket, which will also increase its potential energy due to the increased weight.
The volume of a concrete bucket can vary depending on its size and design, but a common concrete bucket used in construction typically holds between 1 to 2 cubic yards (or about 0.76 to 1.53 cubic meters) of concrete. To calculate the volume, you can use the formula for the volume of a cylinder (if the bucket is cylindrical), which is V = πr²h, where r is the radius and h is the height. Always check the specific dimensions of the bucket for accurate volume measurements.
Actually a bucket is better for the calf because, if placed at the right height (imitating the cow's udder), only then will milk flow into the right stomach.