1.90 meters is the standard, but from experience that will be quite low as some shower head droops down to -2" or -3" from the pipe.
ideal is 2.10m to 2.40m
Answer
If you have an especially tall person in the house, you may want to adjust it to a higher height.
Standard height for a showerhead is 6'-6" to 6'-8". I prefer the high side of that tolerance. A valve for a shower only is put at about 48", a valve for a tub/shower is put at about 30", with the tub spout about 6" to 8" below the valve. The only 'code' requirement (at least around here) is a minimum 1" air gap between the tub spout and the flood level rim of the tub.
I design hotels for a living and all showerheads in new hotels are installed at 6'-8" above finish floor. That is the location of the connection at the wall. The shower head pipe will have a bend in it that usually puts the head itself and around 6'-4"
Different countries may have regulations on this. Check with your local authority.
Consider the convenience of use for all potential users.
A 1m high mixer valve is easy to reach for most users including wheelchair users.
A shower head at 1.9m is a convenient for most users. A better solution is a shower head on a flexible hose with a slide fixing allowing adjustment from say 1m-2m as this will suit more users.
Note that the height should be measured from the finished floor level. Sometimes the Plumbing is installed before the shower tray, and the thickness of the tray is not considered, which results in a slightly lower than expected height for the fixings.
The standard height is 78" but in most new installations the height is 80"
68-70 inches 2.1 meters
I usually fit them about 6" above the tub.
Generally speaking, between 1.8 and 2.2 meters from the base of the shower base
Very high. 6'4"-6'6" from bottom of tub or shower to center of shower head.
Anywhere between 58 and 72 inches off floor is standard
It really depends on the height of the person using it. You can always get a shower arm extension in the same color as your shower and it would be adjustable based on who's using it.
height of a mop sink faucet
Twelve inches from the top of the spout to the shower floor.
Generally 1.2 m from the base of the shower
The height of a standard buffet table should be 34" to 38" in height.
12.75 is the standard height.
Usually 48" off bottom of shower floor to center of shower faucet.
According to the Architectural Graphic Standards The height is 42" from the shower floor. and the head should be between 65" and 78", I usually set this height at 74"
The average is 16 inches, naturally there are some lower and some higher, according to requirements and design.
Standard height = 48" A.F.F.
form_title= Shower Faucet form_header= Install the shower faucet you want in your bathroom! Do you have a working faucet in your bathroom?*= () Yes () No () Not Sure What type of faucet do you want installed?*= _ [50] Do you want the shower faucet to include a massager?*= () Yes () No () Not Sure
There are many companies that manufacture shower taps. Among these companies are Delta Faucet, Peerless Faucet, Moen Faucets, Kohler, and American Standard brand faucets.
one meter
Yes
yes
Faucet parts in Arlington Texas
height of a mop sink faucet
YES