While many of the terminal parts of a circuit may be a series element, in most circuits there will be both series and parallel components.
Neither is superior - they both have their appropriate applications.
Both take current and energy from the power supply and dissipate power.
AnswerInductances add in series, so the formula is simply L=L1+L2. Inductance is handled in the same manner as resistance in serial and parallel circuits.
Series circuit gives higher resistance compared to parallel circuit.
If you are saying that the Zeners are connected in series, the answer is Yes.
Parallel circuits are used when there are many electronics on the same circuit, such as Christmas lights, for example. If they were on a series circuit, if one bulb went out all of them would go out. In your home, parallel circuits allow you to turn any electrical device on or off, independently of the others.
There are no particular advantages or disadvantages of series or parallel circuits. Some circuits require one while other circuits require the other. Frequency filters often require one or the other depending on whether you need a pass or rejection filter.
There are no particular advantages or disadvantages of series or parallel circuits. Some circuits require one while other circuits require the other. Frequency filters often require one or the other depending on whether you need a pass or rejection filter.
Basically if there is a break in a parallel circuit then it will continue to work, whereas if there was a break in a series circuit everything will go off.
parallel combination of resistors are used in house circuits
There are no particular advantages or disadvantages of series or parallel circuits. Some circuits require one while other circuits require the other. Frequency filters often require one or the other depending on whether you need a pass or rejection filter.
The two basic types of circuits are series and parallel circuits.
The types of circuits are series and parallel!
FEEDBACK CIRCUITS. In addition to parallel and series circuits, there are also closed and short circuits.
that is called a perfect circuit
asd
In electronics DC stands for direct current. There are three types of circuits in this current. They are the closed, open, and series circuits.
The two main types are series and parallel circuits. From these two circuits comes combinations of different series parallel circuits depending on what end results you need.