0
i think in case of dc supply there will not be any induction
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
If an inductor and a switch are connected in parallel through which the current will flow in an AC circuit?
A:The inductor does not allow ac signal to pass through. It blocks ac and passes dc. If the switch is open, then the ac signal wont pass. If the switch is closed, then the ac signal will pass through the switch.AnswerIt is incorrect to say that an inductor 'does not allow' the passage of an alternating current. An a.c. current will pass through an inductor, although the inductor will limit the value of that current due to the inductor's inductive reactance. Inductive reactance, which is expressed in ohms, is directly-proportional to the inductance of the inductor and to the frequency of the supply. The value of the current is determined by dividing the supply voltage by the inductive reactance of the inductor.If the switch is connected in parallel with the inductor, then closing the switch will apply a direct short circuit across the inductor, and the resulting short-circuit current will cause the circuit's protective device (fuse or circuit breaker) to operate.
When inductor is called short circuit and open circuit?
In DC inductor is short circuited .
What will happen to dc signal if positive probe connected to negative terminal and negative probe connected to positive of the dc supply?
If you are referring to using a volt meter then you will just get a negative reading on most modern digital meters. If you are using an old analogue meter you may get no reading.
What will happen if dc supply is given to shunt dc motor?
It will drawn a large amount of current which can destroy the shunt
What would cause a meter to read negative voltage across a DC motor?
A DC motor generates power when it is rotating even when no supply is connected.
What is a DC shunt motor?
A DC shunt motor is a motor using DC supply with the the inductor connected parallel to the armature.
What is a shunted motor?
A DC shunt motor is a motor using DC supply with the the inductor connected parallel to the armature.
What happens if dc supply is connected to incomer of transformer?
If a DC supply is connected to the incomer of a transformer, you effectively have a short circuit, because the DC impedance of a transformer (actually, any inductor) is quite low. You will blow something.
Is it possible to heat coil using dc power supply?
Yes, it possible to heat a coil using dc power supply. An inductor resists a change in current, proportional to voltage and inversely proportional to inductance. The equation of an inductor is di/dt = v/L An ideal inductor, if connected to an ideal DC supply, with ideal conductors, would ramp up current in a linear fashion without limit, eventually reaching infinity amperes after infinite time. Since no inductor is ideal, nor is any DC supply, nor is any conductor, the current would reach a maximum based on the capacity of the DC supply and the DC resistance of the inductor and conductors. Since the DC resistance of the inductor is also not zero, this means, by Ohm's law, that the inductor must dissipate some power. That will cause the inductor to heat up.
What will happen if transformer are connected to dc supply?
It will get core saturation
What will happen if DC Fan connected to AC Supply?
The fan begins chattering or hamming.
Can we use a DC source with an inductor?
Yes, an inductor allows DC to pass through it. An inductor resists a change in current, proportional to inductance and voltage. At equilibirum, an ideal inductor has zero impedance. The differential equation for an inductor is di/dt = v / l
Can a DC series motor with speed control be connected on AC supply?
A dc series motor with speed control can be connected on ac supply because dc machines are totally reversible.
How dc supply is applied to field coil in a brush less alternator?
Through a coupled inductor, similar to a transformer, but working on DC instead of AC.
Why there is no reactive power in DC system?
In case of dc there is no reactive components and current drawn from the supply is in phase with the voltage.due to absence of inductor and capacitor the reactive power demand in dc is zero.
If an inductor and a switch are connected in parallel through which the current will flow in an AC circuit?
A:The inductor does not allow ac signal to pass through. It blocks ac and passes dc. If the switch is open, then the ac signal wont pass. If the switch is closed, then the ac signal will pass through the switch.AnswerIt is incorrect to say that an inductor 'does not allow' the passage of an alternating current. An a.c. current will pass through an inductor, although the inductor will limit the value of that current due to the inductor's inductive reactance. Inductive reactance, which is expressed in ohms, is directly-proportional to the inductance of the inductor and to the frequency of the supply. The value of the current is determined by dividing the supply voltage by the inductive reactance of the inductor.If the switch is connected in parallel with the inductor, then closing the switch will apply a direct short circuit across the inductor, and the resulting short-circuit current will cause the circuit's protective device (fuse or circuit breaker) to operate.
Why a transformer designed for a 120V AC input will often burn out if connected to a 120V DC source?
All transformers are designed to work on AC. They do not work on DC.If you connect an inductor to DC, the current will increase until the capacity of the source or the conductance (1/resistance) capacity of the inductor and conductors is reached. Often, this condition will overheat and destroy the inductor, or destroy the source. A transformer is not an exception, as it is a form of inductor.
