At over 11,000 volts, the victim will usually pass away.
you would die
4.5 volts in series; 1.5 volts in parallel.
A computer is considered digital because of the way that it stores information. The bit, which is a single "on" or "off" in a computer system, is a single digit. An example of a difference between digital and analogue is thus: If you have a voltage, from 0 to 5 volts, you could represent 2.5 volts in an analogue system as 2.5 volts. However, in a digital system, that voltage would need to be converted. The resolution refers to how many "steps" there are between 0 and 5 volts. Let's say that we were going to represent our voltage with 8 bits (or 8 on and off states). That gives us a potential for 256 combinations, with 0 being 0 volts, and 255 being 5 volts. Therefore, 2.5 volts would be represented by 128. That is a DIGITAL representation of an ANALOG value.
The answer is "It Depends" Watts of electircal power is defined as Voltage x Current. Amperage is a unit of current. In most houses in the US the voltage is 120 volts AC. A 100 watt light bulb in the house would have 120 volts across it so the current flowing would be: Watts = Volts x Amps 100 watts = 120 volts x I amps A amps = 100 watts / 120 volts A amps = 5/6 amps ANSWER watts is a product of voltage and current .One quantity will never suffice
It would decompose
There would be no sexual reproduction.
That would depend on the divisor which has not been given.
I would call it a 900000-gon. For a large number of side (more than 20), the Greek prefix should only be used for a Greek audience or an audience which you wish to irritate.
Expanded notation defines the meaning of each of the nonzero digits in the number. The number 1970000 would be expanded as: 1000000 + 900000 + 70000.
At 120 Volts you would draw about 42 amps. At 240 Volts it would be about 21 amps. For 120 Volts you would need 6 AWG and for 240 Volts you would need 10 AWG.
No. 12 volts peak to peak would be 6 in the positive polarity and 6 negative polarity. Simply saying 12 volts AC would be 12 volts in each polarity or 24 volts peak to peak
No it would not.
1 ton
if you have 160 volts how much would that be in watts
It depends upon the chemistry. Alkaline cells generate 1.5 Volts each, so six of them would yield 9 Volts, whereas six rechargeable cells would only yield 7.5 Volts, since each cell produces 1.25 Volts.
From a three phase four wire distribution system the voltages would be as follows. From L1 to N - 277 volts. From L2 to N - 277 volts. From L3 to N - 277 volts. From L1 to L2 - 480 volts. From L2 to L3 - 480 volts. From L3 to L1 -480 volts.
yes, 126 is a little high.. 1 or 2 volts ok
From the stand to stand I would say about, 1,000,000 Volts. This may not be correct