If the switch is what is keeping the load from turning on, then yes, there is a voltage across the open switch.
Turning a switch on closes a circuit.
It will not work because it has to be closed so the electricity can go to the bulb.
A closed series circuit is one where the current flows through all devices in the circuit. Opening a switch prevents current from flowing in the circuit and it becomes simply an "open circuit". Any device that operates with current (light, LED, motor, etc) will no longer function.
*Look at the simple circuit illustrated in Figure A-2. What will happen when only switch S1 is closed? Correct Answer= "Nothing will happen-the light bulb won't light up." <<>> If there is a load in the circuit the load will operate. If there is no load in the circuit and it is complete then a short circuit will occur and something in the circuit will burn open. If the circuit is complete and there is a fuse or breaker in the circuit, then the fuse or breaker will open the circuit.
open and closed circuits
A switch is a device that is used to open and close an electrical circuit that is is connected into.
Closed. If it is open then the power is off.
There is a complete path for the electricity to flow. The opposite of an open circuit. If a light switch is on and the light comes on, the circuit is closed. If the switch is turned off, the light goes off because the circuit is open.
When a switch is 'open' that means it is in the 'off' position. 'Closed' means 'on'.
it is called a circuit and when it is closed is called a closed circuit and when open circuit it is called an open circuit
It will not work because it has to be closed so the electricity can go to the bulb.
In an open circuit no cuttent can flow so the switch would have to be in the off position- the switch is open and not completing the circuit. A closed circuit is one where current can flow all the way through, the switch would have to on and therefore closed.
---o-----o----- is a closed switch / / ---------o o------ is an open switch
An open circuit is one where the current is not able to complete the circuit. An example could be a light bulb connected to power but switched off, the circuit being broken by the switch, and considered "open." When flipping the switch On, it connects the power and the circuit is then closed.
So that when the switch is in the open position the circuit is open and electricity cannot complete the circuit. When the switch is closed it completes the circuit and electricity flows completing the circuit and powering the device.
a closed circuit is a complete circuit with no breaks at all, one example:- a closed circuit occurs when you turn the light switch on an open circuit has a physical break in the circuit, which stops the flow of electrons. one example is when the lights are turned off, the switch creates a physical break in the circuit
If there's a broken wire then the circuit is no longer closed. It's open.
Yes, an open switch breaks the circuit and prevents electricity flowing through. A closed switch on the other hand completes the circuit and in turn helps electricity travel through the circuit.