0
What else can I help you with?
Two resistors are connected in parallel to a battery What must the votlage across these two resistors?
Both resistors will have the voltage of the battery.
What are photo resistors?
photo resistors, or light dependent resistors, are devices with variable resistance, that cahnges depending on how much light is hitting the device
What color represent for clockwise in potentiometer?
There is no color code for potentiometers as it is variable.
What is your observation of resistors in parallel resistors?
RParallel = 1 / Summationi=1toN (1 / Ri)
Where are variable resistors found?
dimmer swithces for lights usually contain variable resistors
What is the color code of a capacitor?
The color code of capacitor uses the same color coding as resistors. The color represents a specific value in a progression from left to right.See related links below
What is the color code that indicates 20 percent tolerance?
Resistors made to a 20% tolerance do not have a color in the 4th tolerance band.
How do manufacturers of resistors indicate the value of the resistance?
They use a color code. Colored bands on the resistor that tell the value. Some precision resistors have their value written on them.
What is the Technique used in resistors is coding or decoding?
If you want resistor color code, look in wikipedia electronics color code
What is the SIC Code for Electronic Resistors?
SIC 3676 applies to ELECTRONIC RESISTORS.
What is the resistor color code and how is it used to identify and select resistors?
The resistor color code use to help to identify the resistance of the resistor. There are four color in the resistor that help to identify the resistance of the resistor. The first and second color represent the numerical value of the resistor. The third color represent the multiplier. The four color represent the tolerance.
What is a system used to label resistors?
color
What is the color coding for resistors?
orange-orange-orange
What happens to the value of a resistor when it goes bad?
we can say that a resistor gone bad if 1. its resistance is different than that printed by the color code 2. doesn't conduct any current Resistors normally will burn open. Carbon resistors almost always do this, while wireound resistors can lower in resistance. They may still allow current flow, but it will not be correct.
What does this indicate about the technical rating of resistors?
"this" what... Color band, element material, size...?
History of the resistor color code?
According to what i have read is that... there once was an electrical engineer... and he had difficulty in remembering the resistance values of the resistors and used to mix them up! That engineer was also known as a good artist, so he used the colors and marked them so that it would be easy for him to remember. This idea was then followed by many others and hence color coding on resistors spread and is now used internationally.
What is Toyota color code LA01?
Toyota color code LA01 is the interior color code for ivory.
