Because of stray capacitance. At very high frequencies, the inter-electrode capacitance has a low enough impedance that the diode no longer cuts off when reverse-biased, there is still significant conduction via capacitive coupling. High-frequency diodes are constructed so as to minimize this capacitance.
Men do not need to sit down when they urinate and the urinal that they use often have a waist high wall (if that) between them. They are made they way the are to have as many urinals in one space as possible.
I dont no but mate if you havn't read the books read them well better then the film... well mabe not the first book
i dont kno i dont kno i dont kno
I dont know charlie, ... i just dont know..
has to do with energy levels in the atomic shells Geranium is about .2V Cu CuO2 diodes are used in analog meters they dont have a voltage drop but are less efficient 75% or so ratio forward to reverse so on a line powered analog meter the low volt scale is a bit different from the others digital meters gotta have external power anyway so so uses a diode backed with an op amp (hiQuality rectifier)
i dont know i m asking
they use frequencies in uhf range since animals dont make those sounds
Because two diodes is not a transistor. There is an interaction between the junctions in the transistor, because of their proximity, that you don't get in the two diodes. The only use of modeling a transistor as two diodes back to back is to test a transistor with a multimeter as a quick go-nogo test for basic operability.
ordinary water ordinary water ordinary water
No, the Denon DHT-589BA systems subwoofers dont have a great deal of distortion at low frequencies.
totally dont do it from there because they dont upload properly
i dont know if u dont know i dont know
whan your muscles dont get oxygen the dont work or they dont work properly.
You dont have to, you are entitled to do it properly.
i dont know ask someone else
people dont indicate properly
good cause i dont get your question properly