0
Will the batteries being dead in the remote keep the green light from coming on in your digital tv converter box?
If the batteries in a remote are dead, the only result is that the remote control won't work. It won't in any way affect the operation of the device that it controls.
If the converter box is in standby, then the remote won't turn it on if it has dead batteries. If the converter is on, then it should keep operating as you would expect it to if the remote control isn't being used.
What else can I help you with?
Where can you buy a remote for kcpi dt504 digital tv converter box?
you have to call 9098612929 or buy it off ebay
What is the universal remote program code for dolby digital converter?
It would depend on the brand of remote that is being used. Just look at the instructions that come with the remote to find out how to properly set it up.
How do I program an att U-verse remote control to work with an Insignia digital to analog converter box Model nsdxa1?
To program your AT&T U-verse remote to work with the Insignia NS-DXA1 digital to analog converter box, first, turn on the converter box. Then, press and hold the "TV" button on the remote until the red light blinks and then stays on. Next, enter the code for Insignia, which is typically 11680 or 11684, and press the "Enter" button. If successful, the red light will turn off; if not, repeat the process using the next code until the converter responds.
What is the universal remote code for a Philco TB100HH9 digital converter box?
Found a solution that works well... I picked up a Sony RM-VL600 universal remote with learning capability. With this unit, I've been able to program all the functions of the TB100MW9 DTV Converter box. I picked up this unit at Walmart for $25, but have seen it on Amazon for as little as $16. This remote is a vast improvement over the remote that comes with the Magnavox DTV converter, and was easy to program. Found another solution.... after tinkering with the Philips universal remote for an hour, i finally found a code that can control the magnavox converter. the code is 0759. the Philips remote i have is SRU3006/27 but it might work for any Philips universal remote. the remote itself cost me about 15 dollars. if you call Philips or magnavox they would say none of the remotes can operate the converter.they obviously didn't know their own product...
How can you find the remote code for TCL lcd tv for your comcast digital converter box?
I've read elsewhere that Logitech Harmony universal remotes will work using RCA codes, they suggested L32HD31 as your TV to get it to control the TCL tv and comcast. I have used 10047 and 11781 as the remote code for a TCL LCD TV on my Comcast digital adapter remote. They are each RCACodes, that work perfectly on TCL , as RCA is owned by TCL.
How do you program digital converter box when it won't turn on to put the code in for the remote?
You can still program the remote with the converter box off if you know the code. Then Use it to turn the converter on.
RCA universal codes for digital stream conv box?
Digital Stream converter box remote code: Philips Universal Remote works on '1776'
What are Sentry big remote control codes for digital stream digital converter box?
I used 067 for a Jumbo Universal Remote...you could try that.
How do you program a ge universal remote to apex digital converter?
To program your remote you have to search for the local channels in your area.
Will a Universal remote control run TV and Digital Converter Box?
Walmart is offering an number of replacement universal remote controls that may be programed(by entering the correct code into the remote) that will operate an large variety of manufacters digital converter boxes.So, the answer to the question is yes.
What is the universal remote code for a suddenlink digital converter dc732?
The code is 911 (not a joke)
Sony remote rm-y195 code for channel master digital tv converter cm7000?
214
What is the 4 digit universal remote code for a philco digital converter?
The universal remote code for a Philco digital converter can vary depending on the remote brand. Common codes include 1004, 1015, and 1020, but it's best to consult the user manual of your specific universal remote for the correct code. If those do not work, try using the code-search feature on your remote to find the correct one.
Can you program a cox remote to work with a digital converter box?
remotes that are built for cable boxes like the cox remote is a universal remote control. although this is a universal remote, it normally will only work with cox digital converter cable boxes. therefore if the digital converter box that you want to control is from cox or motorola (or similar supported affiliate of cox) then pressing the CABLE button will control that said digital converter box. The AUX button will normally not control another digital cable box, because the manufacturer figures that the only converter STB that you will be using is theirs. thus, the CABLE button is only set for their STB. Normally to control weird or unpopular digital converter boxes - universal remotes are recommended. there are many brands, but make sure you find a learning universal remote. so in case the digital converter box code is not in the universal remote (like in the cox universal remote) then you can program it in yourself - hence the term "learning remote" i picked up a ton of these last year for christmas for everyone in my family because they were dirt cheap and most ppl watch tv. so a universal learning remote for everyone was convenient & cost efficient for the state of the economy last year. i posted a link of where i got mine from, but there are many on the market. find what you like & purchase it, but make sure its a learning universal remote.
Where can you buy a remote for kcpi dt504 digital tv converter box?
you have to call 9098612929 or buy it off ebay
What is the universal remote program code for dolby digital converter?
It would depend on the brand of remote that is being used. Just look at the instructions that come with the remote to find out how to properly set it up.
You got a game changer remote 4 in 1 you need codes for your apex dt250 digital converter box?
motorola
