11: No crank signal to computer. Fault in wiring between crankshaft position sensor (CPS) and ECM ( PCM or computer ) or faulty CPS.
12: Battery disconnected. Battery or power to the ECM disconnected in the last 50 key cycles.
66: TCM to PCM failure. No message from the Transmission Control Module (TCM) to the Powertrain Control Module (PCM)
Engine speed sensor circuit malfuntion
i need to disable jeep factory alarm 1997 cherokee
If they are Cherokee's then yes. Grand Cherokee no.
1985-1996 Jeep Cherokee XJ should interchange 1997-2001 Jeep Cherokee XJ should interchange
It will bolt up, but it will not shift. 1997 is electric, 1994 is hydraulic
Error code 66 on a 1997 Jeep Cherokee means TCM to PCM failure. This code means that the transmission control model is not communicating with the powertrain control model.
Code 12 just means that the battery has been recently disconnected
Diagnostic code 43 in the 1997 Jeep Grand Cherokee refers to an issue with the distributor. This often causes the Jeep to stall at operating temperature.
no, the body style on the Cherokee changed in 1997
Engine speed sensor circuit malfuntion
Check the computer for error code 11. http://www.jedi.com/obiwan/jeep/dtc.html
no
NoNo
P1491 = radiator fan relay circuit
Trouble code P1694 means: No CCD message from PCM- Aisin transmission
what Cain of oil pump those my jeep Cherokee 1997 4.0 have? what Cain of oil pump those my jeep Cherokee 1997 4.0 have?
i need to disable jeep factory alarm 1997 cherokee