you have a magnetic starter on this vehicle, the starter is no good, you might try to hit it with a hammer to get it to start.
It can be interferance caused by Fluorescent lights, Transformers, (such as battery chargers) switchless lights, you name it. Anything that plugs into electric current in your home can in one form or another. In your quest to find the problem, you will often overlook what the actual problem is.
Check the ignition switch itself, sounds like it may be the problem.
Terrestrial noise is noise that originates on the earth. Extra terrestrial noise comes from space.
You can see why noise like vuvuzela noise, or other very loud noise are not cancelled by most or all headphones and what types of headphones would do it's best to cancel such noise here: electronics.howstuffworks .com/gadgets/audio-music/noise-canceling-headphone3.htm You can also learn how to try and rid yourself of such noise from your TV here: wikihow .com/Filter-the-Vuvuzela-Noise
above the noise?
The cast of The Lights and Then the Noise - 2012 includes: Emily Taaffe as Girl
What kind of noise: A motor hum? A high-pitched sound? Which lights: the kitchen lights? The ceiling fan light? Sounds like you have your lights on a dimmer and that will cause a high-pitch sound. The noise is motor hum and a "clinking noise" almost like the glass domes are loose (they aren't). The lights I was referring to are the ceiling fan lights. I am not using a dimmer switch. Also, it is a Hunter ceiling fan (I don't know the model. It was a mid-range fan as far as price: $109.00)
It may not be the fan making "more" noise when you turn on the lights. It may actually be the bulbs making noise. Incandescent bulbs when operating on a dimmer make a high pitched noise - it is the filament vibrating. Try just the lights without the fan and see if you hear anything.
That can be normalThat can be normal
ya mine did the same thing does the lights work if so then it might me your ingintion switch check the fuse pannel under the hood by the battry
I have a 1989 Probe and also had a tick, I found that the exhaust manifold bolts were loose. I removed the heat shield and tighten the bolts. NO MORE TICK
If it is like a whirring whine that is probably a normal 4X4 noise. Any other noise I'd be looking into as a problem.
you probally have a bad expansion valve it has a temp probe and controls the size of the opening by how cold the temp is and if the compressor is making noise there may be metal that contaminated the valve assy.
it makes a hollow noise when you pull on it but when it is a normal piece of paper it makes a crinkly noise
60 decible
A noise level of 65 decibels is equivalent to the sound of a normal conversation or background music in a restaurant. It is also the recommended noise level for a comfortable working environment.
more than likely the tensioner