You need to adjust your neutral safety/back up light switch, it is located on the passenger side tranny just behind the bell housing. Loosen the 12mm bolt at the top and rotate the switch until the light comes on ( engine off, key on and wheels blocked ), if no luck take it off and clean the inside of the switch and try again. Set so it will start in park too.
yes
It will bolt up, but it will not shift. 1997 is electric, 1994 is hydraulic
No.No.
A 1991 Jeep Cherokee computer is what fits a 1991 Jeep Cherokee.
Yes. 1984 to 1996 use the same tails. 1997 to 2001 use different tails and are not compatible with earlier years
yes
What are the wire color codes on the tail lights of a 03 jeep grand Cherokee?Read more: What_are_the_wire_color_codes_on_the_tail_lights_of_a_03_jeep_grand_Cherokee.
The shift solenoid is inside the transmission on the valve body.
The cost depends on where you take the Jeep Cherokee to be fixed. There will be a cost for the lights and other supplies plus a charge for the labor.
It will bolt up, but it will not shift. 1997 is electric, 1994 is hydraulic
No>
The shift solenoid B is located on the engine section on the automatic transmission for the 98 Jeep Cherokee 4x4 Sport.
check your fuses
in the bumper xx
No.No.
Transmission trouble
Possible, but doubtfull