0
What else can I help you with?
What is a groove on a lp?
A groove on a vinyl LP (long-playing record) is a spiral track that runs from the outer edge to the center of the record, containing the audio information. As the record spins on a turntable, a stylus (or needle) tracks along these grooves, translating the physical undulations into sound. The width and depth of the grooves vary, allowing for the encoding of different sound frequencies and dynamics. Each groove represents a continuous waveform of the recorded audio, enabling the playback of music.
Who is u2 guitarist?
The Edge (real name Dave Evans) plays lead guitar for U2the edge
What is Edge's entrance song wikianswerscomQWhat is Edge's entrance song?
Edge's entrance theme is 'Metalingus' by Alter Bridge.
What radio station is the Edge?
In Tulsa, Oklahoma. Z104.5 is ''The Edge'' In Toronto, Ontario, Canada 102.1 FM is "The Edge"
What are the names of the moody Blues albums?
Ignoring the live albums, anthologies and compilations, they are:Denny Laine, Clint Warwick, Ray Thomas, Mike Pinder and Graeme Edge line-upThe Magnificent MoodiesJustin Hayward, John Lodge, Ray Thomas, Mike Pinder and Graeme Edge line-upDays of Futured PassedIn Search of the Lost ChordOn the Threshold of a DreamTo Our Children's Children's ChildrenA Question of BalanceEvery Good Boy Deserves FavourSeventh SojournOctaveJustin Hayward, John Lodge, Ray Thomas, Graeme Edge and Patrick Moraz line-upLong Distance VoyagerThe PresentThe Other Side of LifeSur la MerJustin Hayward, John Lodge, Ray Thomas and Graeme Edge line-upKeys of the KingdomStrange TimesJustin Hayward, John Lodge and Graeme Edge line-upDecemberThe band has also contributed songs to charity albums and soundtracks, including What Child Is This?, This Is the Moment, Journey into Amazing Caves and a re-recording of Legend of a Mind to commemorate the death of Timothy Leary in 1996.The Moody Blues Encyclopaedia - Victor Rust (Second Editon)
Which type of fit-up for double U groove and j groove?
Butt joint fit-up where both pieces meet edge to edge.
Is edges the same as recesses?
a recess is a groove into an object and an edge is a corner of an object. they are similar, if a square recess is cut into a shape, it would have 4 more edges
How can I create a tongue and groove joint for my woodworking project?
To create a tongue and groove joint for your woodworking project, first, use a table saw to cut a groove along the edge of one piece of wood. Then, cut a corresponding tongue along the edge of the other piece of wood. Make sure the tongue fits snugly into the groove for a strong and precise joint.
How do you properly use the tongue and groove technique in woodworking?
To properly use the tongue and groove technique in woodworking, first, cut a groove (slot) along the edge of one piece of wood. Then, cut a corresponding tongue (protrusion) on the edge of another piece of wood. Fit the tongue into the groove, ensuring a snug and secure fit. This technique creates a strong joint that helps align and connect the wood pieces together.
Which coin has 119 grooves?
A quarter has 119 grooves on its edge, a dime has one less groove
Muddle FINGER to make a word similar in meaning to tassle and edge?
Muddle finger= fringe, which is similar to tassle and edge.
How can I effectively use the tongue and groove technique to join wood pieces together?
To effectively use the tongue and groove technique to join wood pieces together, first, cut a groove along the edge of one piece and a corresponding tongue along the edge of the other piece. Make sure the tongue fits snugly into the groove. Apply wood glue to the joint and press the pieces together firmly. Clamp the pieces in place until the glue dries for a strong and secure bond.
How can I create a tongue and groove joint using a hand router?
To create a tongue and groove joint using a hand router, first, set up the router with the appropriate bit for the desired joint size. Then, carefully guide the router along the edge of one piece to create the groove. Next, adjust the router to create the matching tongue on the edge of the other piece. Ensure both pieces fit together snugly for a strong joint.
How can I effectively create tongue and groove joints using a table saw?
To create tongue and groove joints using a table saw, first set the blade height to half the thickness of the wood. Use a dado blade or multiple passes with a regular blade to cut the groove along the edge of one board. Then, adjust the fence to cut the corresponding tongue on the edge of the other board. Test the fit and make any necessary adjustments for a snug joint.
How do you remove the power steering pully on a 1990 Ford Thunderbird 3.8L?
You have to have a puller that fits on the groove just behind the front edge of the pulley.
What type of simple machine has a wheel with a groove along its edge?
the answer to your question is easy the simple machine a wagon wheel is a wheel and axel
Will the song please answer me by Broken Edge in the 1984 Karate Kid ever be available?
There hasn't been any official announcement regarding the release of "Please Answer Me" by Broken Edge from "The Karate Kid" (1984). Licensing issues and the availability of older soundtracks can complicate re-releases. However, fans often hope for soundtracks to be made available through platforms like streaming services or special edition releases. Keep an eye on music news for any updates!
