Yes you can, however it is not recommended. Due to the greater stress placed on the neck, the guitar will warp. If you use nylon strings, it will help prevent this stress. If you are concerned about the stress, or safety, I would recommend purchasing a learner guitar from a music store.
The main difference between a lap steel guitar and a regular guitar is the height of the strings. The strings of a lap steel guitar are typically raised to about half an inch (much higher off of the fretboard than a conventional guitar) and are usually meant to be played with a slide.
Yes you can and they will work fine, the tone will be affected. The steel strings for an electric guitar (steel so they interact with the magnets on the pickup) will not sound as full and rich as the bronze strings designed for acoustic. In a pinch, they will work just fine! (but not visa-versa because of the magnet thing).
Guitars usually have six strings, although there are variations on this, the most common being a twelve-string guitar; the seven string guitar; the ukulele, which has four strings; and the bass guitar, which usually has four strings but also exists in five, six, eight, and twelve-string versions. There are also more exotic models involving multiple necks and pickups. The weight of a string is determined by its diameter and is normally measured in thousandths of an inch. The larger the diameter the heavier the string is (with thinner strings being lighter). Heavier strings require more tension for the same pitch and are consequently harder to hold on to the fretboard. Heavier strings will also produce a louder note and for this reason steel-strung acoustic guitars will normally be strung heavier than electric guitars. On electric guitars, heavier strings may also produce a thicker tone, leading to their use by rhythm guitarists in rock music.
The distance between the highest point of a fret and the strings. Different styles if playing may require different actions. Metal/shred will have lower ones while rock/blues will have higher ones. But a typical set up (measured from the top of the 17th fret to the bottom of each string) is around 4/64 if an inch.
3
The main difference between a lap steel guitar and a regular guitar is the height of the strings. The strings of a lap steel guitar are typically raised to about half an inch (much higher off of the fretboard than a conventional guitar) and are usually meant to be played with a slide.
The recommended pickup height for a Stratocaster guitar is typically around 1/8 inch (3.2mm) from the strings.
Pickups on a guitar should typically be around 1/8 inch (3-4 mm) away from the strings for optimal sound quality and performance.
The recommended pickup height for a vintage Stratocaster guitar is typically around 1/8 inch (3.2mm) below the strings.
Yes you can and they will work fine, the tone will be affected. The steel strings for an electric guitar (steel so they interact with the magnets on the pickup) will not sound as full and rich as the bronze strings designed for acoustic. In a pinch, they will work just fine! (but not visa-versa because of the magnet thing).
Guitars usually have six strings, although there are variations on this, the most common being a twelve-string guitar; the seven string guitar; the ukulele, which has four strings; and the bass guitar, which usually has four strings but also exists in five, six, eight, and twelve-string versions. There are also more exotic models involving multiple necks and pickups. The weight of a string is determined by its diameter and is normally measured in thousandths of an inch. The larger the diameter the heavier the string is (with thinner strings being lighter). Heavier strings require more tension for the same pitch and are consequently harder to hold on to the fretboard. Heavier strings will also produce a louder note and for this reason steel-strung acoustic guitars will normally be strung heavier than electric guitars. On electric guitars, heavier strings may also produce a thicker tone, leading to their use by rhythm guitarists in rock music.
Guitars usually have six strings, although there are variations on this, the most common being a twelve-string guitar; the seven string guitar; the Ukulele, which has four strings; and the bass guitar, which usually has four strings but also exists in five, six, eight, and twelve-string versions. There are also more exotic models involving multiple necks and pickups. The weight of a string is determined by its diameter and is normally measured in thousandths of an inch. The larger the diameter the heavier the string is (with thinner strings being lighter). Heavier strings require more tension for the same pitch and are consequently harder to hold on to the fretboard. Heavier strings will also produce a louder note and for this reason steel-strung acoustic guitars will normally be strung heavier than electric guitars. On electric guitars, heavier strings may also produce a thicker tone, leading to their use by rhythm Guitarists in Rock Music.
After changing guitar strings, the proper way to secure and trim the string end is to wrap it around the tuning peg and then use wire cutters to trim off the excess string, leaving about half an inch of the string sticking out. This helps prevent the string from unraveling and ensures a clean finish.
If by 32, you mean 32 inches, then it is a regular sized guitar, maybe an inch or two shorter. It may also be a slightly longer 3/4 size. A full size guitar is more around 34.5.
The pickup distance from the strings for the keyword provided is typically around 1/8 inch to 1/4 inch.
The ideal pickup height sweet spot for a Stratocaster guitar is typically around 1/8 inch (3.2mm) from the strings for the neck and middle pickups, and slightly lower for the bridge pickup to balance the output. Adjusting the pickup height can affect the tone and output of the guitar.
Not sure what you mean by regular tires, but a 17 inch tire will fit a 17 inch rim.Not sure what you mean by regular tires, but a 17 inch tire will fit a 17 inch rim.