My wife has an '04 so I hope this helps you: get to the station you want. Hit the set button on the far right. Tap the number you want to set it at, or tap it twice to set it to the next number.
I mean that it acts like this:
1 2 3 4 5
6 7 8 9 10 (when the first number is tapped twice)
so that you will actually be able to program 10 stations.
Hope this helps, good luck.
-Nick
sorry, no it will not. they changed the radios in 2000. notice the face on the 2002 has round corners but the 98 has square corners. now the good news any radio out of a Dakota/ram/stratus/breeze etc from 99 back about 5-6 years will fit. I just put a 96 stratus am/FM/cass/CD in my 97 Dakota & son did the same in his 99 ram
One of the easiest and quickest ways to do this, is to go to an audio store and buy a wire harness. It should plug right into the factory plug (providing that it is still intact) and then plug into your new radio. If not, it will have ready to go wires for the harness that came with your radio.
Yes
Check for a blown fuse. It could have 2 fuses. Maybe an inline fuse along with the fuse in the fuse panel.
my radio has static in it an i put another one in it an it still has static in it to.
single
Go to this web site called installdr.com it will give you the color codes you are looking for.
take the tire off the left front and open the front fender wall the battery is behind there
There are 2 little buttons on the radio display one for the hour and one for the minute that you have to press with a pin or something sharp of some sort to adjust the time.
To install a Sirius satellite radio plug-and-play unit in a 2004 Dodge Stratus, first, mount the antenna on the roof or windshield for optimal reception. Connect the antenna to the satellite radio unit, then plug the radio into the vehicle's power outlet using the provided car adapter. If your unit has an FM transmitter, tune your car radio to the designated frequency; otherwise, use an auxiliary input if available. Finally, secure the radio unit in a convenient location, ensuring it doesn’t obstruct your view while driving.
sorry, no it will not. they changed the radios in 2000. notice the face on the 2002 has round corners but the 98 has square corners. now the good news any radio out of a Dakota/ram/stratus/breeze etc from 99 back about 5-6 years will fit. I just put a 96 stratus am/FM/cass/CD in my 97 Dakota & son did the same in his 99 ram
In a 2002 Dodge Stratus, the fuse for the stereo system is typically located in the fuse box under the dashboard on the driver's side. Look for a fuse labeled "Radio" or "Stereo," which is usually a 15-amp fuse. Always consult the owner's manual for the exact location and specifications, as fuse configurations can vary by model and production year.
first you have to pop the cover off that's around the radio and then remove the 2 screwes that holds the radio. second unplug the wire connector from the radio. you also need a stereo connector for your aftermarket CD player to connect to the existing wire connector. once you have installed the connector to your CD player you need a installation kit for a 2000 dodge stratus to put your CD player in and bolt it to the existing holes your radio came from. plug your connectors and antenna wire together and reinstall your 2 screwes and pop your cover back on and you are done.
The power door locks and the radio in a 2000 Dodge Stratus SE may stop working at the same time because of a blown fuse. Another issue may be faulty wiring causing a problem for one or both of the issues. Both of these problems can be fixed by taking the vehicle to an automotive garage or shop to be fixed by someone who has experience in these vehicles.
One of the easiest and quickest ways to do this, is to go to an audio store and buy a wire harness. It should plug right into the factory plug (providing that it is still intact) and then plug into your new radio. If not, it will have ready to go wires for the harness that came with your radio.
Yes
The 2001 Dodge Neon standard radio is grounded to the radio retaining screws. When you install the radio simply attached the ground wire to the radio retaining screws.