The drum in your Canon business copier, which is a part that works hand-in-hand with the toner cartridge, is susceptible to dust and dirt. A dirty drum transfers debris onto paper, resulting in dirty copies and documents containing missing words and graphics. Your Canon copier may also imprint streaks of toner around the edges of copies. When cleaning your Canon copier_¾_s drum, do not use a liquid cleaning solution, water or an abrasive towel to remove the debris. These substances not only damage the drum but also your copier.
I heard it is if you just dry it when you're done. If you leave it wet then it will rust.
It is the metal part around the outside of the drum that is around the drum head.
Drums or main drums. they are the main beat source during music.
Bass drum. The bass drum in a trap set is also called the kick drum.
A bass drum hoop is the outer rim of the bass drum that sandwiches the bass drum head to the actual shell of the bass drum.
Evidently you have a page printing Laser Printer rather than an Inkjet or matrix style. That technology uses a drum. This is similar in concept to a copier, and contains a Drum. It may be an integral part of the toner cartridge.
The Brother DCP-7060D Laser Multi-Funtion Copier uses a toner cartridge and drum unit cartridge. The Brother TN-420 Black Toner Cartridge is available for 41.79 and the Brother DR-420 Drum Cartridge is 87.79 from the Staples website.
You should use drum polish to clean your drum set. Use a soft clean cloth to wipe the polish off the drums. Avoid using napkins and paper towels, they are too rough.
Canon recommends using water or a mild cleaning solution to clean the copier glass on its products. A well wrung out lint-free cloth is preferred to paper towel.
Cleaning glass on a fax copier machine is best done using specialist materials. These tend to not contain water, and the cloths tend to not collect a static charge. This prevents damage to the copier.
In order to completely wipe a hard drive on a Canon branded copier, one must format the hard drive. Formatting the hard drive will erase all information. The operating system of the copier can then be re-installed.
Most copiers have a small brush just after the toner is backed on to recycle the toner the copier did not use. Some copiers also have a small brush just as the paper exits the copier to ensure a clean copy. Your owners manual will give more details
so that you could hear better.
you get a towel and clean
TONER
In a fit of technophobic rage, Leo threw the copier against the wall.I think the copier is broken again.
the drum may be washed by dilute hydrochloric acid or you may use vinegar and finally with water.