To use the scan function on an Infinity Model K-911-V radio, first turn on the radio and select the FM or AM band as desired. Then, press the "Scan" button, which will automatically search for and stop on the next available station. You can press the "Scan" button again to continue scanning through available stations. To manually stop scanning, simply press the "Scan" button once more or adjust the tuning knob.
The radio may be programmed by the radio's keypad or software. There is a password needed to access keypad programming. Software is needed for 2 and 5 tone paging and initial setting of scan channels and the radio groups.
To scan for radio stations on a 2008 Mercedes-Benz C300, first, turn on the radio. Then, press the "FM" or "AM" button to select your desired band. Next, press and hold the "Seek" button until the radio begins to scan for available stations automatically. Release the button once you want it to stop scanning, and it will tune to the next available station.
i assume you mean radionucleid uptake scan? this is a scan performed with radioisotopes to determine areas of under activity and can be used in many parts of the body including the thyroid kidneys and liver.
Yes. Turn on a radio and scan for the stations. The Country Music awards were just on TV.
Yes, But... the VIN number is stored in the radio. You will need to take your vehicle to someone (probably a GM dealer) the that has a Class 2 GM Scan tool and have them program the radio with your VIN number.
The radio may be programmed by the radio's keypad or software. There is a password needed to access keypad programming. Software is needed for 2 and 5 tone paging and initial setting of scan channels and the radio groups.
I believe on that model you press the seek/scan buttons while turning the dial.
You need a Tech II scanner, Using a connected Tech2, 1. At the Main Menu screen, select: Diagnostics. 2. At the Vehicle Identification screen, select the following options: ■ Model Year ■ LD Trk, MPV, Incomplete 3. At the System Selection Menu screen, select: Body 4. At the Vehicle Identification screen, select the following: ■ Appropriate model ■ Appropriate Air Conditioning ■ Navigation Radio 5. At the Body Screen, select: Navigation Radio. 6. At the Radio screen, select: Special Functions. 7. At the Special Functions screen, select: VIN Relearn. 8. At the VIN Relearn screen, the scan tool will display "Do you want to clear radio theft information?" 9. To begin clearing, press the soft touch key on the top right of the scan tool. The scan tool will display "Clearing Radio Theft in Progress." 10. Press EXIT on the scan tool and cycle the ignition. Important: The radio theft will learn the VIN. Without learning the VIN, the radio will display a locked message (LOC or LOCKED).
To scan for radio stations on a 2008 Mercedes-Benz C300, first, turn on the radio. Then, press the "FM" or "AM" button to select your desired band. Next, press and hold the "Seek" button until the radio begins to scan for available stations automatically. Release the button once you want it to stop scanning, and it will tune to the next available station.
In a 2003 Volkswagen Passat, the "AS" button on the radio stands for "Auto Scan." When pressed, it allows the radio to automatically scan through available radio stations, pausing briefly on each one to allow you to listen to a segment of the broadcast. If you find a station you like, you can simply stop the scan and tune in to that frequency. This feature makes it easier to find stations without manually searching through them.
Depending on the model you may have a scan port located under the dash. Older models use a jumper wire under the dash, then read the light flashes on the dash lights. The year model is needed to determine how ho scan the particular model.
a blah blah blah = u are a noob bob...
i assume you mean radionucleid uptake scan? this is a scan performed with radioisotopes to determine areas of under activity and can be used in many parts of the body including the thyroid kidneys and liver.
The scan that is not nuclear is typically referred to as an MRI (magnetic resonance imaging) scan. It uses a magnetic field and radio waves to create detailed images of organs and tissues in the body.
Send me your email for a scan of the model 41 manual.
no it can't.
You turn the ignition to run and then pull the Scan and Seek buttons OUT. Scan changes the hours and seek changes the minutes