That makes no sense at all.
On Bop It bounce you can keep on taping the top with your hand and it will calibrate your hand as the ball.
The 'Calib' button on your chromatic tuner is used to calibrate the tuner. Standard tuning has 440 hertz frequency difference between half-steps on the musical scale. Some tuners will allow you to re-tune this to 441 or a few hertz off. The calibrate button selects the frequency. Make sure you get it set to the right frequency (stick with 440 hertz), or you'll create audible harmonic interference when playing with others.
Tektronix Service Solutions is the global leader for instrument calibration, repair and related services. We provide local depot and on-site instrument ...
The reason you are using said instrument is because it is accurate. But to be consistently accurate it must have parameters. It can't go beyond a certain measure. To keep it in this proximity, or within it's boundary, it must be re-evaluated every so often, to make sure it is the same as when it was first used as a comparison. Seriously, take a music appreciation course or something. Maintain quality control of the final product.
how we calibrate the level switch
how calibrate spark pulg for suzuky verona 2005?
Calibrate it at sea level and then again at an elevated position where the height it known. This would allow one enough reference point to calibrate it accurately.
If you feel the touch insensitivity is better to calibrate your touch screen.
You need to about calibrate your ds about one time every three weeks. The reason you need to calibrate the screen is that the Nintendo has a touch screen, so it depends where you touch it. If you calibrate the screen very very closely you will get the exact touch on the screen. Once I didn't calibrate it and i missed a big chance of doing something on my Nintendo. GOOD LUCK!!!
Hygrometer is an istrument to measure moisture content in air, By comparing with master instruments we can calibrate this.
Re-calibrate what, exactly?
sadly, you cannot calibrate a genio touch as they are already calibrated.
no
how which is right and which is wrong. You need a voltage standard with that you can calibrate both to the standard
I personally have know idea but tectronics? tektronics? will calibrate it for about $70.00
how many times should you need to calibrate your glucometer in a week