remove the radio of the car than it will be a # on the radio call your locar vw service dealer to ask for the code.
Every radio has it's own code. You need to go to a VW dealer and they will get the code for you by removing the radio. It shouldn't cost anything to do this unless there is a problem and they need a mechanic to help.
As far as I know you must have the Vin number and the radio serial number. Both of these numbers have to be submitted by an authorized VW dealer through VW Hub to get a theft code.
#42, 25A
No. You buy a waring harness and connect it to the car wiring and the amp to the speakers there behind the radio.
t6
You can shop for a VW Caravelle at a VW dealership closest to you. Another place to look if you don't mind used is to call or a make a trip to your local used car lots.
"The MSRP value for a used volkswagen caravelle is 4,495 to 47,000 depending on the year."
There are numerous ways to purchase a Volkswagen Caravelle. You can either go to your local Volkswagen dealership or you can search your location and model of the car (in this case Volkswagen Caravelle).
With hub adaptors yes
"The Volkswagen Caravelle can only be found in Europe, mostly in Germany and the United Kingdom. A good price for a used Caravelle would be �4495. They can also fetch up to �47000."
A Volkswagen Caravelle is a popular small car and prices can range dramatically depending on the condition and mileage of the vehicle, from less than a thousand to more than ten thousand dollars.
There is no level indicator on the gearbox. The oil is checked by topping it up.
how do you remove a 1999 vw passat radio
Try asking on the forums at www.t4club.co.uk very helpful friendly free commity for worldwide VW T4 owners
The VW T5 Transporter can seat between 6 to 9 people depending on what seating configuration there is. The T5 is available with Kombi, Shuttle, Caravelle, and Multivan.
To reset the service indicator on a VW Caravelle, first turn on the ignition without starting the engine. Press the gas pedal fully three times, then turn off the ignition. After that, turn the ignition back on, and the service indicator should be reset. If this method doesn't work, consult the owner's manual for model-specific instructions.