Open the fuse box, find the right fuse and pull it out
Depends of course on the vehicle but there are different fuses for the locks than the lights. My suggestion is to open the door so the lights are on and pull relays from the fuse block under the hood till they go out. This should disable both auto locks and dome lights.
Check for a broken wire in the harness going to the drivers door.
What year is your TL? If a newer model you need to enter into the systems menu located where your mileage is displayed. Go into settings and select which option you would like for automatic door locks. Some people set it to off so that they dont accidentely lock their keys inside. I think the other 2 settings are by the seconds.
you have a cut wire in the drivers side door wiring, they get opened & closed so much that wires get cut, open the black boot in the door jam & you'll find your cut wire.
on my '96 grand Cherokee the door switch was not depressed enough. you can replace it by opening the door removing 2 screws on the switch pull it out unplug it put another one in and put it back together. If you cannot find another switch pull the switch loose and place a small flat washer behind the switch on top and bottom and screw back together.
How do you disable the automatic door locks toyota 4runner 2013, with keyless system.
Remove the relay or fuse for the door locks.
Remove the relay or fuse for the door locks
To disable it or put it on again . Turn ignition key on and off 4 times
all you can do is pull out the fuse for the power locks and lock the doors yourself
Remove the fuse.
Remove the power locks and windows fuse you will loose power for your windows also
the dealercan turn them off with a scan tool
Your owners manual should instruct you on how to do this.
We have a 2000 Montana and yes it does have automatic door locks.
You can disable the lock switches on all the doors. Take the two screws out, slide the spring over and disconnect the switch.
Look on the inside of your drivers side door, there should be a latch which you can disable. Lis@