The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON or START position. The manufacturer does not recommend deactivating the Enhanced Warning System (BeltAlert)
1. Turn the ignition switch to the OFF position, and fasten the driver's seat belt.
2. Start the engine, and wait for the Seat Belt Warning Light to turn off.
3. Within 60 seconds of starting the vehicle, unbuckle and re-buckle the driver's seat belt at least three times, ending with the seat belt buckled, within 10 seconds.
4. Turn off the engine. A single chime will sound to signify that you have successfully completed the programming.
The Enhanced Warning System (BeltAlert) can be recactivated by repeating this procedure.
(This will also work on the new 2011 Jeep Grand Cherokee)
The Enhanced Warning System (BeltAlert) can be enabled
or disabled by your authorized dealer or by
following these steps:
NOTE: The following steps must occur within the first
60 seconds of the ignition switch being turned to the ON
or START position. DaimlerChrysler does not recommend
deactivating the Enhanced Warning System
(BeltAlert).
1. Turn the ignition switch to the OFF position and
buckle the driver's seat belt.
2. Start the engine and wait for the Seat Belt Warning
Light to turn off.
3. Within 60 seconds of starting the vehicle, unbuckle
and then re-buckle the driver's seat belt at least three
times within 10 seconds, ending with the seat belt
buckled.
NOTE: Watch for the Seat BeltWarning Light to turn on
while unbuckling and off while re-buckling the seat belt.
It may be necessary to retract the seat belt.
The best and safest method is to wear the seat belt.
Check your owners manual, there may be a turn off method.
Check with your dealer. Their scan tool may be able to turn it off.
Wear your seatbelt !
You put on yourseat belt!
Theses answers r cute lmao but obviously its a PROBLEM AND NOT AN OPTION. all the s3atbelts in the car are buckled and it dings the whole way.. so lets try helping one another other tryna be smart
The 2009 Jeep Grand-Cherokee has a V6 engine.
The curb weight of the 2009 Jeep Grand-Cherokee is 4316 lbs..
The maximum payload of the 2009 Jeep Grand-Cherokee is 1180 lbs..
The 2009 Jeep Grand-Cherokee has a 3.7 L base engine size.
The maximum tosing capacity of the 2009 Jeep Grand-Cherokee is 6500 lbs..
The 2009 Jeep Grand-Cherokee has a V6 engine.
The 2009 Jeep Grand-Cherokee has 12 valves.
The 2009 Jeep Grand-Cherokee is a gas-powered vehicle.
The curb weight of the 2009 Jeep Grand-Cherokee is 4316 lbs..
The 2009 Jeep Grand-Cherokee's turning circle is 36.7 ft..
The 2009 Jeep Grand-Cherokee has a 27.0 degrees angle of departure.
The 2009 Jeep Grand-Cherokee has single overhead cam (SOHC).
The height of the 2009 Jeep Grand-Cherokee is 5 ft. 8.7 in. (68.7 in.).
The 2009 Jeep Grand-Cherokee is 15 ft. 8 in. (188 in.) long.
The 2009 Jeep Grand-Cherokee has a drag coefficient of .41 Cd.
The maximum payload of the 2009 Jeep Grand-Cherokee is 1180 lbs..
The 2009 Jeep Grand-Cherokee runs on regular unleaded.