To enter a zero press the button zero times (ie ignore it)
To input the numbers on the Honda radio code use the preset keys. The buttons allow the numbers to scroll between 0 and 9.
you dont
First you need the code to enter. Check your owner's information for a business card with Anti-Theft Radio Identification Card at the top. There is a 5 digit code. Enter that using the number keys of your radio when you see "Code" on the digital screen of the stereo. If you don't have the code, you need to get it from a Honda dealership. You will need the system's serial number to get this.
If you've lost (or never received) the security code for the radio, you'll have to pull the radio out of the dash to get the number off the back of it. That number, along with the vehicles VIN number, will allow your local Honda dealer or Honda's 800 customer service number to give you the unlock code for the radio that was built-into that vehicle.
First clear all codes. remove the neg. battery cable for 10 sec. then turn the radio on it will display CODE. Enter the 5 digit numbers using the preset buttons numbered 1 to 6. Yes above answer is right but don't forget you need to take out your radio and get the serial number off it and call your local Honda dealer to get the code to reset it.
Go to your local Honda dealer and buy a new manual. They aren't that expensive. REALLY!!! how to introduice radio code in a crv auto radio?
If you have already tried to enter a code many times, and it doesn't work, do the following: 1. Disconnect the battery, 2. Connect the battery, 3. Put Radio ON 4. Enter the radio code of 4 digits, 5. That's all. If you don't have the radio code of your Honda Odyssey, have on hand its VIN, and ask your former salesperson or your former dealer.
how to enter radio code honda fit
Enter the code with the preset buttons on the radio.
You enter the 5 digit code by pressing the radio presets. As there is no 8 on the radio presets the code cannot contain the number 8. To find out what your code actually is go to the Honda Owners website and register your Honda. After registering it you can get the code there by clicking Retrieve Radio/Navi code under quick links. http://owners.honda.com
in order to get the radio code you must first take out the stereo and get the serial number off the back of the radio then call a Honda dealership with the VIN and proof of ownership and they can get you the code. You then enter the code using the preset buttons. GOOD LUCK!!
If you are asking about the radio unlock code you enter it with the radio preset buttons.
Use the radio preset buttons to enter the code after turning the ignition on.
Power the radio, and then enter the anti-theft code using the preset numbers at the bottom of the radio. If the anti-theft code is unknown, contact Honda with the 17-digit vehicle identification number.
I assume you mean the radio code. If so, you enter it with the radio preset buttons.Call your Honda dealer because nobody seems to know how.
First you need the code to enter. Check your owner's information for a business card with Anti-Theft Radio Identification Card at the top. There is a 5 digit code. Enter that using the number keys of your radio when you see "Code" on the digital screen of the stereo. If you don't have the code, you need to get it from a Honda dealership. You will need the system's serial number to get this.
You enter the 5 digit code by pressing the radio preset buttons.
The code needed to reset the radio is the model number on top of the radio. The you must call a Honda dealer to get the code. If you are the original owenr or have the owners manual, the code may be in the written in the manual. i need to know how to enter the code on the radio the radio reads ERR 3
Once you see code on the display use the preset buttons to enter the 5 digit code.