0
By this i take it that you mean the "jack plug to jack plug lead" This depends on how it is broke, if it has stopped working then chances are there is a break in the wire somewhere, check the jack plugs at each end if they have a screw type jack plug, unscrew the cover and check for one of the wires being off, if it is, then it needs to be soldered. If the jack plugs are still wired up then the break is in the lead, if you plug the guitar into the amplifier and feel along the lead whilst striking the string you may be able to locate the area of damaged flex and cut the lead back. On the other hand, if the lead has moulded jack plugs then its not really worth repairing as it can cost more for new jack plugs and then its trial and error, you can cut off the jack plugs solder the new ones on, however, if it turns out there is a break elsewhere in the lead then this will have been for nothing.
What else can I help you with?
The E string on a guitar makes a sound as if you are tuning with another guitar or string on your own guitar and the string is out of tune but only that one string is being played How can you fix it?
grab a tuner and check if the strings are in tune. Perhaps that ones out of tune.
What is the smallest string number on a guitar?
The lowest string on a guitar is an E .........
What to do if your guitar string pops?
you go to a guitar shop and get another string
Is the guitar a string or wind instrument?
String.
Is a guitar in the percussion family?
No, the guitar is a string instrument.
How can I fix a snapped guitar string?
To fix a snapped guitar string, you will need to remove the broken string, replace it with a new one of the same gauge, and tune it to the correct pitch. Be careful when removing the broken string to avoid damaging the guitar.
How can I fix a broken string on a guitar?
To fix a broken string on a guitar, you need to remove the broken string, replace it with a new one of the same gauge, and tune it to the correct pitch.
How can I fix a loose guitar string?
To fix a loose guitar string, you can tighten the tuning peg corresponding to that string until it reaches the desired pitch. Be careful not to over-tighten the string, as it may break.
How can I fix a broken electric guitar string?
To fix a broken electric guitar string, you need to remove the broken string, replace it with a new one of the same gauge, and tune it to the correct pitch using the tuning pegs.
The E string on a guitar makes a sound as if you are tuning with another guitar or string on your own guitar and the string is out of tune but only that one string is being played How can you fix it?
grab a tuner and check if the strings are in tune. Perhaps that ones out of tune.
How can I fix a string on a guitar?
To fix a string on a guitar, you need to first loosen the tuning peg for that string, remove the broken string, and then replace it with a new one. Make sure to properly thread the new string through the bridge and tuning peg, and then tighten the tuning peg to tune the string to the correct pitch.
Why is my g string buzzing on my guitar and how can I fix it?
Your G string may be buzzing on your guitar due to a few reasons, such as improper string height, a loose fret, or a problem with the nut or saddle. To fix it, you can try adjusting the string height, checking for any loose frets, or having a professional guitar technician look at it for a more thorough assessment and repair.
How can I fix a guitar string that has broken or come loose?
To fix a broken or loose guitar string, you can replace it with a new string of the same gauge and type. First, remove the broken string by unwinding it from the tuning peg and bridge. Then, insert the new string through the bridge and wind it around the tuning peg, making sure to tighten it to the correct pitch. Finally, trim any excess string length and tune the string to match the other strings on the guitar.
How can I fix an electric guitar string?
To fix an electric guitar string, first loosen the tuning peg corresponding to the broken string. Remove the broken string from the bridge and the tuning peg. Replace it with a new string of the same gauge. Thread the new string through the bridge and the tuning peg, then tighten the tuning peg to tune the string to the desired pitch. Cut off any excess string.
Why does my guitar string sound dead when fretted?
A dead-sounding guitar string when fretted can be caused by factors like old strings, improper fretting technique, or issues with the guitar's setup. It may also be due to lack of proper maintenance or a need for adjustments to the guitar's action or intonation.
How can I fix a guitar string that has broken?
To fix a broken guitar string, you will need to replace it with a new one of the same gauge. First, remove the broken string by loosening the tuning peg and unwinding it. Then, insert the new string through the bridge and the tuning peg, and tighten it by turning the tuning peg until the string is in tune. Cut off any excess string and tune the string to the correct pitch.
How can I properly go about fixing guitar strings?
To properly fix guitar strings, first identify the broken string and remove it from the guitar. Next, choose a replacement string of the same gauge and material. Thread the new string through the bridge and tuning peg, then tighten it to the correct pitch. Trim any excess string and tune the guitar to ensure proper tension.
