There is probably a small piece of paper jamming the switch inside the slot.
The switch is triggered as you push the paper in, it is very sensitive and light and can be easily jammed in the run position.
Be careful and make sure it is unplugged before putting you fingers near it.
Try using a small piece of paper and sliding it sideways in the slot to clear any debris.
If all else fails you may have to take the machine head apart to clear shreds of paper from the cutters and sensor switch.
you take a piece of paper and cover it in baking soda. stick it under the key pad and press the key down then slowly pull the paper out. this works on all key pads.
Yep. Might even cause the engine to stop running forever when it overheats and seizes up. Your engine loves you and wants you to stop asking questions and fix the coolant system. Something is causing you to have low coolant levels and you need to figure out why. Take it to a reputable shop for diagnosis.
ask company to fix it
you have too many programs running. to fix this, try closing some programs, or if that does not help or worsens the situation, do the following: click on Start, click Run, and type Chkdsk. this will delete unnecessary files, thus making your computer run and process faster.
Use a piece of cigarette paper and hold it under the key, press the key down and blow into your oboe without the reed. If it continues sticking, take it to a local music shop and they should be able to fix it in a few seconds with no charge.
To fix a paper jam, you must first locate where in the printer the paper jam is, if your printer has multiple paper trays. * When you have located the jam, turn the printer off. * If you can see the paper, remove it slowly and carefully with both hands by pulling the edge out in the direction it would naturally be released. * Open the printer door to look for any stuck paper. * If there are bits of paper still inside the printer, take a piece of heavy-weight paper or cover stock and push it through the printer in the same path. This will push out any bits of paper. * Turn the printer back on. Repeat the steps if the printer still alerts you to a paper jam.
Well, darling, the cost to repair a paper shredder can vary depending on the issue. It could be as cheap as a few bucks for a simple fix or as pricey as buying a new one if it's completely busted. Best bet is to shop around and get some quotes, but don't be surprised if it's more cost-effective to just toss that old paper muncher and upgrade to a new model.
To stop a toilet from running constantly, you can try adjusting the float valve in the tank or replacing the flapper valve. If these steps don't work, you may need to call a plumber to fix the issue.
Your toilet may be constantly running due to a faulty flapper valve or a problem with the fill valve. To fix it, you can try adjusting the chain on the flapper valve or replacing the flapper if it is worn out. You can also adjust the fill valve to ensure it is working properly. If these steps don't work, you may need to call a plumber to diagnose and fix the issue.
Your water heater may be running constantly due to a malfunctioning thermostat or a buildup of sediment in the tank. To fix it, you can try adjusting the thermostat settings or flushing out the tank to remove any sediment. If these steps don't work, you may need to call a professional plumber to diagnose and repair the issue.
Your toilet may be running constantly due to a faulty flapper or fill valve. To fix it, you can try adjusting the chain on the flapper or replacing the fill valve. If these solutions don't work, you may need to contact a plumber for further assistance.
To fix a constantly running toilet and stop water wastage, you can check the flapper valve, fill valve, and overflow tube for any issues. Adjust or replace these parts as needed to ensure they are functioning properly. Additionally, check for any leaks in the toilet tank or bowl and repair them promptly.
Your toilet may be running constantly due to a faulty flapper valve or a problem with the fill valve. To fix it, you can try adjusting the chain on the flapper valve or replacing the flapper if it is worn out. You can also adjust the fill valve to ensure it is working properly. If these steps do not solve the issue, it may be best to contact a plumber for further assistance.
If your toilet fill valve is leaking, you may notice water constantly running into the toilet bowl. To fix it, you can try adjusting the valve or replacing it with a new one.
I will fix it
To fix your Wii U system that is constantly updating, simply do a software update.
how do i fix my daytime running lights on my 2001 grand prix gt headlights work perfect