go to one auto shop store and buy some recharging A/C system kit, and also buy the couplings for your LOW SIDE A/C PORT, which is NOT r13-14a, is R12, that's called freon, the KIT is around 40 dolls and the KIT with the valves (converters from R12 to r13-14a) is around 10 dollars, you could make with these your conversion to r13-14a, good luck!
Jeep Cherokee's are unibody. You cannot install a body lift.
1990 will require an OBD1 reader
Yes
If the fuses are good on a 1996 Jeep Cherokee and the horn still will not work, check the horn relay switch on the passenger side fender wall inside the engine compartment. Also check to make sure that the horn is hooked up properly.
yes There was also a Laredo package for the XJ Cherokee in the 1990's.
Jeep Cherokee's are unibody. You cannot install a body lift.
how to install a fuel pump on a 2000 jeep Cherokee 6 cylc
yes
no it wont fit cause ive just changed a 1990 jeep Cherokee transmission it had a 1998 jeep grand Cherokee transmission in it it broke the fly wheel and burned the torque converter up
I have a jeep Cherokee of that year and I believe that what you are refering to is a spherical thermometer and horn assembly.
Right behind the grill
if they are the same engine then yes.
Cherokee is a hard top only vehicle.
5x4.5
Very carefully
What engine?
The original tire size for a 1990 Jeep Cherokee Laredo is P195/75R15. The tires are for 15 inch wheels for the vehicle.