0
What else can I help you with?
How do you listen to radio stations without an online stream?
It can get pretty complicated. You need a radio receiver, and you need to be close enough to the transmitter of the station you want to receive. Also, you need to know that station's transmit frequency, and tune your receiver to that frequency.
The transmit frequency is 140.250 MHz what is the best choice for the receive frequency?
Try 140.250Mhz. There should not be any shift from sent to received.
From the book the Giver. How did the old receiver transmit the memory of snow to Jonas?
by touching Jonas on the back
What device picks up radio waves?
I believe that would be a wireless router.They transmit data from your computer to a radio wave transmitter and from there to a radio receiver in a wireless card either built in to a motherboard or to an external wireless card. Which the computer translates back into electrical impulses. and finally process's the information.And yes that is a lot of information but some people want a lot of informationa transceivertransceivera transceiver
Can you browse the internet with short wave radio receiver?
No, Computers transmit microwaves and radio waves are entirley different on the electro magnetic spectrum
How can I transmit video wirelessly from a camera?
You can transmit video wirelessly from a camera by using a wireless video transmitter that sends the video signal to a receiver connected to a display device, such as a TV or computer.
How do you listen to radio stations without an online stream?
It can get pretty complicated. You need a radio receiver, and you need to be close enough to the transmitter of the station you want to receive. Also, you need to know that station's transmit frequency, and tune your receiver to that frequency.
How does the receiver transmit to Jonas?
By telling him.
How do you find IF Frequency from RF Frequency?
Transmit RF frequency subtract to the Receive frequency
What are receiving devices in computer?
As the name suggest, a receiving device receives data that is transmitted by a sending device. Your wireless router and network access points are both senders and receivers. A receive-only device is one that receives but does not transmit. An RF receiver is an example of a receive-only device. E.g., a Freeview receiver can receive digital television transmissions but it does not transmit. A receiver is obviously not a computer in the traditional sense, but it does have microprocessors, memory and is re-programmable through firmware upgrades. It's primary purpose is to decode the transmissions it receives so, by any definition of the word, it is a computer.
What is the purpose of the FM transmitter?
A radio receiver is an electronic device that receives radio wave/signal and convert the information carried by them to a usuable form through speaker. The principal functions of a radio receiver are frequency selection, amplification and detection of signals which are been convert back to its original form through the help of radio speaker.
Why is it difficult for a station on a 802.11 to transmit and listen to the channel at the same time?
If you transmit on the receive frequency , you would overload or "Block" the receiver since yours would be the strongest signal around. All transceiver's mute the receive circuit while transmitting and many share parts of the circuits between transmit and receive. (IF and Audio most common).
What was the previous receiver's job with Jonas?
previous receiver's job with Jonas was to transmit all the memory to Jonas.... by:diksha
How do wifi smart camera work?
Wifi smart camera transmit video through a radio frequency (RF) transmitter. The video is transmitted to a receiver that is linked to a built-in storage device or to cloud storage. You'll have easy access to all of your images or video clips via your monitor or receiver.
Does a walkey talkey with frequency 462.55 MHz to 467.71 MHz would work in India?
It should work... just as long as a receiver is nearby with the same frequencies. Any radio will transmit anywhere. it's just that nobody will hear it unless they are on the same frequency and within hearing range.
What will happen when you use a straight through cable to connect your computer to the fast ethernet interface of a router?
that depends. A router network interface is the same as a computer interface, so without a cross-over cable, your computer and router will both try to send data on the same pair of wires which doesn't work. But, some routers are smart enough to sense that data is arriving on the wrong pair of wires and it will automatically swap its transmit and receive paths to make it work. fm
WHAT IS THE what is the Use of satellites in tv transmission?
it is used to transmit information from the provider to a requesting receiver.
