for trash ? put holes 1 inch up from bottom, in drum, at least 1inch in dia,
all around drum, sit drum up on cement blocks, cut top out, drop a few bricks in bottom lay an old grill grate on bricks, [allows air flow]
A standard drum, such as a 55-gallon steel drum, typically weighs around 40 to 45 pounds (18 to 20 kg) when empty. However, the weight can vary based on the material and design. For example, plastic drums of the same size tend to weigh less, around 30 to 35 pounds (14 to 16 kg). When filled, the weight increases significantly depending on the contents.
The cost of drum lessons will vary based on the teacher and where you live, but I found this website that offers very inexpensive lessons. Have a look: http://bit.ly/idiV3R Good luck.
Depending on altitude, it should between 30-45 minutes @ 350 degrees to bake nine average sized chicken drumsticks.
45
i think the piece to make the 45 fit onto the spindle or a turntable was called a spyder
An empty 45 gallon steel drum typically weighs around 30-35 pounds.
112"000
45 US gallons is 5,760 US fluid ounces or 5995 Imperial ounces.
It depends on the size of the drum. If we assume it is 45 gallons - 2000 divided by 45 equals 44.4 drums.
A 45 imperial gallon oil drum typically has a height of about 36 inches (91 cm) and a diameter of approximately 23 inches (58 cm). These dimensions can vary slightly depending on the manufacturer and specific design of the drum. The standard shape is cylindrical, making it suitable for storage and transportation of liquids.
A drum is usually 50 gallons
1 gallon = 8 pints so 45 gallons = 45*8 = 360 pints. Simple!
50 degrees
1800 miles @ 40 miles per gallon = 1800/40 = 45 gallons 45 gallons @ 4.00 a gallon = 45*4.00 = 180.00
45 miles per gallon = 19.13 kilometers per liter.
45 miles per gallon = 19.13 kilometers per liter.
900 miles @ 20 miles to per gallon = 900/20 = 45 gallons. 45 gallons @ 4.00 per gallon = 45*4.00 = 180.00