How do you repair the power windows on a Jeep Cherokee?

Answer 1

First remove the door panel with 5 screws - don't forget the one behind the door lever! With screws removed, carefully lift up and out - then unhook the door lever from the latching mechanism, and unplug the connectors for the windows and mirror and locks. Now that you have full access to the innards of the door, figure out what went wrong and fix it! That's all I got for now. Hopefully somebody can explain the details of the window mechanism including cables and stuff.

Answer 2

this is how Chilton says to do it lower window to down position(if you can) remove door panel remove window weather stripping remove black window surround (should be a screw on top of surround towards back edge) then stationary window should unbolt then remove pins that hold operator to track pick up and pull out the operating window addendum: I've done this twice (one on each front door) in my '99 Jeep Cherokee Classic. I found out that you don't need to remove the window surround and it will save you some time if you don't. The window can be unbolted from the retractor assembly, but everything else is sold only as single unit. It's fairly easy, really, and only requires a few tools. You have to remove the entire interior door panel and disconnect the wiring harness. Just be careful not to drop the window in the process.

Answer 3

remove any screws or bolts (some are very well hidden behind little trim covers or panels.) The panel will come off in one of two ways: 1. Clips in the panel push straight into the door requiring a door panel puller (screwdriver will do fine for most applications) to pop the panel away from the door around the whole perimeter of the panel. Design number 2. Once all fasteners are removed, lift straight up on the panel to slide the retaining hooks out of the door. Number one is the most common design but many manufacturers are switching to number 2.