The way to set the time is relatively easy. You hold the disp button for a few seconds and while holding it you press the numbers on the bottom. Im not sure which ones are which, but if i were to guess it would be 1 and 2 change the hour up and down, and 3 and 4 change the minute up or down. Hopefully this helps.
Matt.
Radio controlled watches use radio waves that are set by synchronizing a time code that are transmitted by a radio transmitter. These radio controlled watches are used to set and display the time accurately.
to set time turn it off and use select
To set the radio on a 2016 Ford Escape, first, turn on the vehicle and press the "Power" button on the audio system. Use the "Tune" knob or the touchscreen to select your desired radio station. You can also save a station by pressing and holding one of the numbered presets until you hear a beep. To switch between AM, FM, or SiriusXM, simply press the corresponding button on the radio interface.
To set the time on a GE radio clock model 7-4901A, first press the "Time Set" button. Then, use the "Hour" and "Minute" buttons to adjust the time to your desired setting. Once the correct time is displayed, press the "Time Set" button again to confirm and exit the setting mode. Make sure to check AM/PM settings if applicable.
To set the time on an old Panasonic radio, locate the "Time Set" or "Clock" button on the front panel. Press and hold this button while using the "Hour" and "Minute" buttons to adjust the time accordingly. Once the correct time is displayed, release the "Time Set" button to save the settings. If your model has a different method, consult the user manual for specific instructions.
To set the time on a 1994 Ford Escort radio clock, first turn on the ignition and the radio. Press and hold the "Clock" or "Time" button until the time display starts to blink. Use the "Tune" or "Seek" buttons to adjust the hours and minutes, then press the "Clock" button again to save the setting. Finally, ensure the display shows the correct time before turning off the radio.
whats a radio
Turn the radio on. Holding down the 'clock' button and use '' (forward) to set minute.
*Turn off the radio press the 'set time' button while pressing the radio station buttons to set the time..
To set the time on a Ford 7000 RDS EON radio cassette, turn on the radio and press the "Menu" button to access the settings. Use the tuning knob or preset buttons to find the "Clock" option. Once selected, adjust the hours and minutes using the same controls, then confirm your settings by pressing the "Menu" button again. The time should now be displayed correctly on the radio.
You will have to scroll through the 6000CD's menu untill you find "BT-OFF" push the right arrowed button so it reads "BT-ON" you have now activated the bluetoooth mode on your 6000CD. Now you have to turn the bluetooth on your phone on and search for devices, you are looking for FORD AUDIO when this is found you will need to enterthe code on your phone, it is "0000", if this fails ensurebluetooth on your phoneis not set to private mode, if this fails then try to find out if your phone is compatiblewith the6000CD by way ofyour local Ford dealer. Hope this helps. Regards Paul
If it is the same as 1992 you push in the volume control knob to display the time and hold it in while you use the seek button to set time.
Take out the radio set before cleaning out the connectors before reinstalling it.
If your radio has a "clock" button press and hold it while using the up/down tuner( or volume, i forget) button to set the time.
Radio controlled watches use radio waves that are set by synchronizing a time code that are transmitted by a radio transmitter. These radio controlled watches are used to set and display the time accurately.
With the key turned on, and the radio turned off, you press the SET button, then use your seek and scan buttons to set the time.
With the radio turned off, you press the SET key, then using the Volume and Tune buttons, you set the time. Once set, press the set button, and your done.