0
What else can I help you with?
Why is your trumpet valve stuck?
Your trumpet valve sticks because it is to dry if you want to fix it buy some valve oil undo the valves and put some along the metal piece.
How do you apply oil to trumpet?
To apply valve oil to a trumpet, first unscrew the cap to the oil. Then uncrew the valve that is sticking. Twisting to the right will loosen it. Take the valve out of the slot, and wipe it dry. It may have pre-existing oils and spit on it. Next, apply a THIN layer of oil to the sides of the valve, and inside the holes. If there is any yellow/brown residue on the valve, scrape it off. Next, put a small amount of oil inside the valve hole itself (where you put the valve). Next, insert the valve back in the slot by lining it up.
Can i use baby oil as trumpet valve oil?
Using baby oil as trumpet valve oil is not recommended. While it may provide some lubrication, baby oil can leave a residue that can attract dirt and grime, potentially damaging the valves over time. It's best to use oil specifically designed for brass instruments to ensure optimal performance and longevity.
How do you oil the pistons on a trumpet?
First of all, for those who are very new to the trumpet, only use the oil you can buy in a music store. Never try to use a substitute that you just have lying around the house. Things like vegetable oil and motor oil do not go in a trumpet. Find the point at which the moving part of the valve (the part you push down) meets the body of the trumpet. You should be able to unscrew this part. Lift each valve out one at a time so you don't put them back in the wrong place. Squeeze some oil out of the bottle onto the large part (the part that goes inside the trumpet). You can also squeeze some inside the opening in which the valve would go, if necessary. Replace the valve and screw the top back on. When you replace the valve, you need to be sure that it goes in with the same orientation as when you removed it. Many modern trumpets come with a nice feature which will allow you to twist the valve until it clicks into place. Blow air through the trumpet and move the valve up and down to make sure air always moves through the trumpet. If air movement halts, it means you either put a valve in the wrong opening, or the valve was replaced incorrectly.
Can you use mineral oil on your trumpet valves?
It's not recommended. Mineral oil is a bit too thick to be used on trumpet valves.
Can you use valve oil on a silver trumpet?
YES you can my instructor and i have a silver trumpet and we use valve oil if you don't have oil use saliva {spit}
Do you use valve oil on the felts in a trumpet?
No.
When do you use valve oil on a trumpet?
After every time you play it. Trust me I used to play one.
Why is your trumpet valve stuck?
Your trumpet valve sticks because it is to dry if you want to fix it buy some valve oil undo the valves and put some along the metal piece.
How do you apply oil to trumpet?
To apply valve oil to a trumpet, first unscrew the cap to the oil. Then uncrew the valve that is sticking. Twisting to the right will loosen it. Take the valve out of the slot, and wipe it dry. It may have pre-existing oils and spit on it. Next, apply a THIN layer of oil to the sides of the valve, and inside the holes. If there is any yellow/brown residue on the valve, scrape it off. Next, put a small amount of oil inside the valve hole itself (where you put the valve). Next, insert the valve back in the slot by lining it up.
What is a TIW valve used for in the oil field?
A TIW valve is a type of safety valve that is used in the oil field. This valve prevents a blow out when drilling for oil.
Can i use baby oil as trumpet valve oil?
Using baby oil as trumpet valve oil is not recommended. While it may provide some lubrication, baby oil can leave a residue that can attract dirt and grime, potentially damaging the valves over time. It's best to use oil specifically designed for brass instruments to ensure optimal performance and longevity.
What are the knobs on the tuba french horn trumpet called?
The knobs on the tuba and Trumpet are called valves. The knobs on a french horn are often called valves or rotors. You use valve oil on the tuba and trumpet, while you use rotor oil for the french horn.
What are the knobs on the tuba and french horn and trumpet called?
The knobs on the tuba and Trumpet are called valves. The knobs on a french horn are often called valves or rotors. You use valve oil on the tuba and trumpet, while you use rotor oil for the french horn.
Do you grease Trumpet valves?
No. You will need to get some valve oil from a music store. Put a few drops on each valve and you should be good to go.
How do you oil the pistons on a trumpet?
First of all, for those who are very new to the trumpet, only use the oil you can buy in a music store. Never try to use a substitute that you just have lying around the house. Things like vegetable oil and motor oil do not go in a trumpet. Find the point at which the moving part of the valve (the part you push down) meets the body of the trumpet. You should be able to unscrew this part. Lift each valve out one at a time so you don't put them back in the wrong place. Squeeze some oil out of the bottle onto the large part (the part that goes inside the trumpet). You can also squeeze some inside the opening in which the valve would go, if necessary. Replace the valve and screw the top back on. When you replace the valve, you need to be sure that it goes in with the same orientation as when you removed it. Many modern trumpets come with a nice feature which will allow you to twist the valve until it clicks into place. Blow air through the trumpet and move the valve up and down to make sure air always moves through the trumpet. If air movement halts, it means you either put a valve in the wrong opening, or the valve was replaced incorrectly.
Can you use mineral oil on your trumpet valves?
It's not recommended. Mineral oil is a bit too thick to be used on trumpet valves.
